Audioengine HD3 Wireless Speakers
High-Fidelity Speakers for Smaller Spaces
When your desk doesn’t have much room, and your bookshelf is a full library, Audioengine’s HD3 speakers are still a great fit. Reducing size without sacrificing sound quality, Audioengine outfitted with HD3 with aramid fiber woofers, silk tweeters, and built-in power amps wrapped in precision-tuned, handcrafted cabinets. The result is high-fidelity audio that feels both detailed and expansive. Connect wirelessly via Bluetooth 5.0 with support for aptX and aptX HD codecs, or connect over a wired connection with RCA, USB, and 3.5-millimeter inputs. You can also use the HD3 with other sound system components, thanks to 3.5-millimeter and RCA variable line outs.
Note: This run is for a pair of HD3 speakers in black, white, or walnut.
Model
Black
Walnut
White
Specs
General
- Audioengine
- Amplifier type: Dual analog class A/B monolithic
- Power output: 60 W peak power total (15 W RMS / 30 W peak per channel), AES
- Tweeters: 0.75 in (2 cm) silk dome tweeters with neodymium magnets
- Woofers: 2.75 in (7 cm) aramid fiber woofers with advanced voice coils
- Cabinet material: 18 mm thick MDF cabinets with wood veneer
- Inputs: 3.5 mm stereo mini-jack, stereo RCA, USB, Bluetooth
- Outputs: RCA variable line-out, 3.5mm mini-jack headphone out
- Mains voltages: 110V – 240V 50/60 Hz auto-switching
- SNR: >95 dB (typical A-weighted)
- THD+N: <0.05% at all power settings
- Crosstalk: <50 dB
- Frequency response: 65 Hz – 22 kHz
- Frequency response (bass reduction switch selected): 100 Hz – 22 kHz (-5dB down)
- Input impedance: 5 kohms, unbalanced
- Protection: Output current limiting, thermal over-temperature, power on/off transient protection
- Operating temperature: 32° – 95°F (0°C – 35°C)
- Storage temperature: -4° – 113°F (-20°C – 45°C)
- Relative humidity: 5% – 95%, non-condensing
- Dimensions (each speaker): 7 x 4.25 x 5.5 in (17.8 x 10.8 x 14 cm)
- Weight (left speaker): 4 lbs (1.8 kg)
- Weight (right speaker): 3.4 lbs (1.5 kg)
Headphone Amplifier
- Headphone amplifier type: OPA2134
- Full-scale headphone output level: 2.0 V RMS
- Output impedance: 2 ohms
- Recommended headphone impedance range: 10 ohms – 10 kohms
Bluetooth
- Internal D/A converter: PCM 5102
- Input bit depth: 24-bits
- Bluetooth version: Bluetooth 5.0
- Bluetooth codecs supported: aptX HD, aptX, AAC, SBC
- Bluetooth range: 98.4 ft (30 m)
- Input data rate: Determined by Bluetooth
- Wireless latency: Approximately 30 milliseconds
USB
- Connector type: Micro-USB
- USB device class: USB 1.1 or above
- Internal D/A converter: PCM 5102
- Input bit depth: 24-bits
- Input data rate: 44.1KHz/48KHz
Included
- 2 HD3 wireless speakers
- Antenna
- Speaker wire (16AWG), 6.5 ft (2 m)
- Power supply w/ detachable AC cord
- Mini-jack audio cable, 4.9 ft (1.5 m)
- (2) Microfiber speaker bags
- Microfiber cable bag
- Microfiber power supply bag
- Setup guide
Shipping
Estimated ship date is Mar 30, 2022 PT.
Payment will be collected at checkout. After this product run ends, orders will be submitted to the vendor up front, making all orders final.
Ask the Community!
