Showing 1 of 81 conversations about:
View Full Discussion
I would like to offer a small clarification. The connector on the BL03 is not QDC but rather an NX7. The cable you linked is appropriate but is not technically a QDC connector. Just don't want folks to get the impression a QDC cable will fit because it will not.
Wait, are you certain? Every NX7 cable I find have pins that are longer than the pins of the BL-03 cable.
Well, I know that the sleeve around the pins is squared off instead of rounded which should allow it to cover the neck of the bl03. The pins may be a bit longer which should not be an issue but I'll have to wait for my NX7 cables to arrive to confirm. 2 things are certain though. QDC will not fit because of the oval shaped sleeve and a TFZ cable which has a shorter sleeve will fit the BL03 but doesn't completely cover the neck of the BL03.
The pins aren't just a bit longer, they are much longer.
I finally received the cables I ordered on 11/11 and I can say that the NX7 style (also referred to as TFZ) does indeed work although it is not perfect.
The surrounding collar of the cable pins does not fully reach the base of the neck on the earphone. I suspected that was going to be the case because the TFZ cable I had from my King Pro fit the same way. It's not a perfect solution but a much better option than the straight variants of the .78 2-pin styles routinely used. I think the neck on the BL03 is unusually long compared to other brands.