Showing 1 of 319 conversations about:
Japheel
0
Jun 16, 2015
bookmark_border
can an external 3.5mm mic be plugged in to the device and distributed via the miniusb?
Jun 16, 2015
moophus
17
Jun 16, 2015
bookmark_border
you can plug in an external 3.5mm mic but what do you mean by "distributed via the miniusb?"
Jun 16, 2015
thomwithah
47
Jun 16, 2015
bookmark_border
Yes.
Jun 16, 2015
Japheel
0
Jun 17, 2015
bookmark_border
can i plug the mini usb to usb to my pc and get the mic signal
Jun 17, 2015
Im420man
36
Jun 17, 2015
bookmark_border
The mic will register as a recording device and not payback through the headphones.
Jun 17, 2015
thomwithah
47
Jun 17, 2015
bookmark_border
You can monitor the mic through the headphones if you like. There are setting in the E-series control panel to support this if you like.
Jun 17, 2015
moophus
17
Jun 17, 2015
bookmark_border
Yes indeed. You can even monitor the microphone through the headphone jack at the same time you are recording the signal in your pc.
You can also apply any of the DSP effects (echo cancellation, noise cancellation, etc) but the recording will be in MONO. With effects off you get a STEREO recording from two of the three mics, depending on orientation.
You can also monitor a LINE IN signal.
In fact, I haven't tried this but I'm pretty sure you can record the BLUETOOTH signal coming in to the unit. (I'll confirm this later)
Keep in mind, the analog to digital converter in this device is of very good quality and capable of 24/96 recording with high signal to noise ration (119db)
There are few things it cannot do... amazing stuff! (i.e. decode dolby digital)
Jun 17, 2015
Japheel
0
Jun 17, 2015
bookmark_border
nice, thanks a ton
Jun 17, 2015
Im420man
36
Jun 18, 2015
bookmark_border
Yes very true, but not enabled by default in the E5 Software. Plus there is a bit of a lag issues with the playback and SBX enabled.
Jun 18, 2015
View Full Discussion