Click to view our Accessibility Statement or contact us with accessibility-related questions
Drop Earpads for Panda Wireless Headphone

Drop Earpads for Panda Wireless Headphone

bookmark_border
Where's the price?
To negotiate the best possible price for our customers, we agree to hide prices prior to logging in.
270 requests
·
1k Sold
·
Free Returns in USA
Product Description
Whether your earpads feel worn out or you want to upgrade your headphone sound signature, these earpads are a welcome addition. Featured here are four pairs of slow-rebound, high-density memory foam earpads for our Drop + THX Panda Wireless Headphones—made with the same attention to detail found on our custom Sennheiser HD 58X and 6XX earpads Read More
Want to know something about this product or how to use it?
Ask the community!

search
close
J41235
61
Mar 9, 2021
I would like to see the headphone frequency response with each set of pads. I would like a better explanation of some of the descriptive jargon. Lower internal reflections: Does this have an effect on imaging, soundstage or what? Tightening the imaging and widening the soundstage: Does tightening just mean better imaging? Wider and more focused soundstage: Is more focused just a better way of saying better imaging? Not sure of difference between this and "Tightening the imaging and widening the soundstage." Tighter soundstage: Relative to original pads? Can you send these pads to outside reviewers so we get more feedback?
VIEW 2 MORE
illtrick
37
Mar 8, 2021
What are the interior dimensions?
zinkus
121
Mar 9, 2021
Locked
To add to this question - does these earpads have a different dimension profile, to make them deeper and avoid ears touching the inside of headphones?
Maxwatts
10
Mar 9, 2021
RayFBro why are you on a product q&a thread straight trolling people?
Maxwatts
10
Mar 9, 2021
zinkusI too am curious about this and hope Drop can provide some information about their new product.
zinkus
121
Mar 9, 2021
RayFOoh Ray, you are such a smarta**.. it's cute, really coresponds to your picture 😊 I don't have a problem with stock earpads, just looking for a possible minor improvement. However, I'm sad for you, that you have nothing better to do with your life than to pick on peoples posts that are not even remotely worthy of picking on.. go on look at the mirror 😊 and have a good life.
(Edited)
RayF
22210
Mar 9, 2021
zinkus

Everyone on this site is worthy! Admittedly, some are little more worth than others. But not you--you're just regular-worthy. And I'm not picking on anyone. This isn't some middle school playground. Everyone here is an adult with a credit card. By the way, I already have a good life, but thanks for the sentiment.
RayF
22210
Mar 9, 2021
Maxwatts Define; "trolling."
iAmBoomerStrong
479
Mar 10, 2021
MaxwattsI too would like to know the product dimensions of the ear-pads ?? Hopefully someone from Drop can help us out with this. Boomer 🐼 🎧
Patson
149
Mar 12, 2021
RayF..I..,
Elon61
14
Mar 14, 2021
iAmBoomerStrongIf you get some more info on the dimensions, i would be glad to hear. i too am hoping for them to be a bit thicker than the stock pads.
iAmBoomerStrong
479
Mar 14, 2021
Elon61DROP CS reached out to me on Friday. They told me to ask in the Discussions / Q&A section of the product. That didn’t impress me at all and I blasted them a little. I told them that many people are asking this question and if they’d post it in the Details section of the product this wouldn’t be happening. I also told them we aren’t Drop Interns so quit asking us to do their job. He then apologized and said he’d have an answer for me by this coming Wednesday (March 18th). I’ll definitely share it here with everyone. Happy Listening... Boomer 🐼 🎧
J41235
61
Mar 17, 2021
I measured the sheepskin pads with calipers while holding them in my hands. The interior dimensions are 1.53" (38.9 mm) wide x 2.28" (57.8 mm) tall x 1.04" (26.37 mm) deep. The plastic ring is not flat so I was measuring to the back of the outer edge. For my existing pads still on the headphones I measure the interior as 1.53" wide x 2.29" tall x 1.045" deep. Here the back of the calipers is touching the headphone under the grill of the cup and I do not know if it is level with the outside of the pad. Also note that all dimensions are approximate. The old and new pads seem pretty close in size though. After I removed the old pads I measured them to be 0.98" - 1.0" deep by measuring distance from back of outer edge of pad with calipers. The thickness varies some around the edge. Maybe they have compressed some with use. If you look at the material of the velour and hybrid velour pads then there is a seam on the inside just like on the original ones. The material from the seam inwards to the headphones is smooth leather-like material just like what is on the outside of the hybrid pads. I did remove my pads by pulling out first over one of the bottom clips like someone suggested. Trying the fenestrated ones.
(Edited)
iAmBoomerStrong
479
Mar 24, 2021
J41235Here are the official measurements for the Drop THX Panda Headphone Ear-cups from Drop Community Support. Hope this helps everyone who’s been asking . . Happy Listening, Boomer 🐼 🎧
search

(Edited)
Sheriff_Dan
42
Jul 16, 2021
iAmBoomerStrongTHEY SHOULD HAVE BEEN ENGINEERED TO ACCOMMODATE VARIOUS SIZE HEADSETS BY CHANGING OUT THE INNER SIZE ADAPTERS. IT'S A TOTAL "SHOT IN THE DARK" BY DROP TO OFFER A PRODUCT LIKE THESE WITHOUT ANY ADAPTABILITY TO THE VARIOUS SIZES OF HEADSETS THAT ARE OUT IN THE MARKET. COMMON GUYS! LET'S GET IT TOGETHER.
Measurements taken not super scientifically using digital calipers (in millimeters).
  • Stock: 40 x 60 x 24
  • Sheep: 44 x 60 x 25.5
  • Fenestrated: 41 x 61 x 24
  • Velour: 44 x 60  x 23.5
  • Hybrid: 43 x 60 25.5
iAmBoomerStrong
479
Mar 24, 2021
As per your request . . Here are the official measurements for the Drop THX Panda Headphone Ear-cups from Drop Community Support. Hope this helps everyone who’s been asking . . Happy Listening, Boomer 🐼 🎧
search

(Edited)
Do the Drop+THX Panda headphone ear-cups come with directions on how to change them? One thing I am seeing by those who have tried to take the original ear-cups off was they are very hard to remove due to some adhesive etc. I would absolutely hate to buy the new Sheepskin ear-cups and I end up breaking my awesome headphones trying to remove the original ear-cups. If they don’t come with directions this should be something you start doing AND/OR make those directions available via an instructional video on the Panda or the Panda Ear-Cups Details or Community section. Looking forward to seeing your reply, until then ..... Safe and Happy Listening. Boomer 🐼 🎧
MarinaraAddict
68
Mar 10, 2021
There is no adhesive holding the pads on. It’s snapping clips. Easily replaceable and swappable.
VIEW 9 MORE
oratory1990
18
Mar 9, 2021
Will these work on the Oppo PM3 as well?
tinyman392
267
Mar 14, 2021
I wasn't able to get the Panda pads to fit on my PM3. Though it could be a user error thing, I couldn't get any of the tabs to line up or even click in. The outer dimensions are good though, it's the locations of the tabs that seems to be problematic IMO.
(Edited)
VIEW 5 MORE
swaina001
13
Mar 9, 2021
I assume these are made by Dekoni. But it’s not on there website where they usually have an instruction video on how to change pads. How do you remove original pads? As mentioned in an earlier post, don’t want to break my cans.
Fayne
2575
Mar 15, 2021
You just have to pull pretty hard. I pulled from the sides and there was some tearing sounds as the excessive glue on the stock pads came lose from the plastic clips that hold the pads assembly on. It might be easier to pull from the top or bottom. Once one of the clips comes lose, the whole pad comes out pretty easily.