Focusrite 6i6 USB Audio Interface
Focus on Quality
Fans of Focusrite’s line of USB 2.0 audio interfaces will notice the sleek, optimum design of the Focusrite 6i6. For recording high quality sound, the 6i6 features analogue/digital conversion capabilities, two preamplifiers, and a 6 in / 6 out audio interface.
Amazing Sound
The design features a protective aluminum outer case to minimize electrical noise, and gain knobs for each mic input that display a green light to indicate when input is detected. The included Red 2 and Red 3 plug-in suite utilizes the design of both the red 2 equalizer and red 3 compressor for the best of both worlds. The Scarlett Plug-in suite is a versatile compression, gating, EQ and reverb suite for ultimate music mixing.
Specs
- Focusrite
- Analog inputs: 2 x XLR/TRS combo jack - Mic/Line/Hi-Z Instrument
- 2 x 1/4" TRS - Line In
- Digital inputs: 1 x RCA coaxial S/PDIF stereo
- 1 x 5-pin DIN - MIDI input
- 1 x 5-pin DIN - MIDI output
- Analog outputs: 4 x 1/4" TRS - Line Outputs
- Digital outputs: 1 x RCA coaxial - S/PDIF stereo output
- Headphone outputs: 2 x 1/4" TRS stereo
- USB connector: 1 x USB 2.0 type B
- Dynamic range: A/D: 104 dB CCIR-RMS (all inputs)
- D/A: 102 dB CCIR-RMS (line outputs)
- Sample Rates: 44.1, 48, 88.2, 96 kHz
- Bit depth: 16-, 24-bit
- Clock jitter: < 250 ps
- Phantom power for mic inputs: +48V, switchable
- Microphone
- Frequency response: 20 Hz ± 0.5 dB, 20 kHz ± 0.1 dB (min. gain)
- THD+N: -96 dB (1 kHz, –1dBFS, 20 kHz BW)
- Noise (NiPoS): –122 dBu CCIR-RMS (measured at 60 dB of gain with 150 ohm termination
- Maximum input level: > +9 dBu
- Line
- Frequency response: 20 Hz ± 0.5 dB, 20 kHz ± 0.1 dB (min. gain)
- THD+N: -80 dB (1 kHz, –1dBFS, 20 kHz BW)
- Noise (NiPoS): –105 dBFS CCIR-RMS (measured at min. gain with 50 ohm termination)
- Maximum input level: > +28 dBu
- Instrument
- Frequency response: 20 Hz ± 0.3 dB, 20 kHz ± 0.1 dB (min. gain)
- Noise EIN: –103 dBFS CCIR-RMS (measured at min. gain)
- Maximum input level: +8 dBu (without pad)
- Line outputs 1 and 2
- Maximum output level (0 dBFS) +11dBu, balanced
- THD +N: -100dB (1 kHz, –1dBFS, 20 kHz BW)
- Height: 2 in (50 mm)
- Width: 8.2 in (210 mm)
- Depth: 7 in (180 mm)
- Weight: 41 oz (1.18 Kg)
Included
- Red 2 and Red 3 AAX plugins
Shipping
Estimated ship date is Mar 30, 2015 PT.
Payment will be collected at checkout. After this product run ends, orders will be submitted to the vendor up front, making all orders final.
Ask the Community!
