So far here is what I've found after a few hours with it, more to come....
You CAN take switch tops off without any desoldering, as the top plate allows for it. If you have LED's, those will need to be taken out first, but this is a fantastic feature if you plan on swapping out switches or tuning them.
It has a Blue PCB and is the same thickness as the POK3Rs. The production PCB will be Black like the GH60
It fits perfectly in the POK3R case with all 6 screws lining up (unlike the V60 where only 3 do), and it is completely flush meaning it will be perfectly compatible with aftermarket cases like the TEX as well.
The dye-sub PBT keycaps are quite nice. They are very close to being a cherry profile. In the image below you can see that it is quite thick (L to R in the pic are KC60, POKER, V60 keycaps).
I can't tell you about the packaging as I did not receive a retail version of it, thus the packaging wasn't retail either.
You can dim the LED's, though I do not think they are per-key programmable.
There are media controls.
You can have up to 9 layers including the base layer, 8 programmable ones.
The GUI it comes with is very easy to use. Will include a full "how to" in my full review.
Works with Ubuntu, OS X, Windows. Windows recognizes it as "GH60" oddly enough.
6KRO
bobspeltbackwardsFor this drop it's locked in. We're going to talk with them about maybe doing a drop for just the plate or maybe having an option next time.
livingspeedbumpCan you test to see if they enabled the virtual DIP switch (Boot Magic) features of TMK?
It lets you do similar things like you would with the DIP switches on a Poker or V60 by holding down key combinations while powering it on.
https://github.com/tmk/tmk_keyboard
Swap Control and CapsLock(Left Control)
Change CapsLock to Control(Caps Lock)
Swap LeftAlt and Gui(Left Alt)
Swap RightAlt and Gui(Right Alt)
Disable Gui(Left Gui)
Swap Grave and Escape(Grave)
Swap BackSlash and BackSpace(Back Slash)
Enable NKRO on boot(N)
As well as run the bootloader and some debugging functions. The tiny button on the bottom is probably a reset for the bootloader.
You CAN take switch tops off without any desoldering, as the top plate allows for it. If you have LED's, those will need to be taken out first, but this is a fantastic feature if you plan on swapping out switches or tuning them.
It has a Blue PCB and is the same thickness as the POK3Rs. The production PCB will be Black like the GH60
It fits perfectly in the POK3R case with all 6 screws lining up (unlike the V60 where only 3 do), and it is completely flush meaning it will be perfectly compatible with aftermarket cases like the TEX as well.
The dye-sub PBT keycaps are quite nice. They are very close to being a cherry profile. In the image below you can see that it is quite thick (L to R in the pic are KC60, POKER, V60 keycaps).
I can't tell you about the packaging as I did not receive a retail version of it, thus the packaging wasn't retail either.
You can dim the LED's, though I do not think they are per-key programmable.
There are media controls.
You can have up to 9 layers including the base layer, 8 programmable ones.
The GUI it comes with is very easy to use. Will include a full "how to" in my full review.
Works with Ubuntu, OS X, Windows. Windows recognizes it as "GH60" oddly enough.
6KRO