shopping_cart
Showing 1 of 48 conversations about:
mttu
9
Oct 31, 2019
bookmark_border
Could Linsoul, or someone who owns this cable measure its resistance? As that's pretty much the only technical characteristic of a cable that can have any effect on sound (due to channel imbalance or the headphones seeing a higher impedance source+cable combo). Here's how to measure resistance: A digital multimeter will do. Just set it to ohms, put one probe on the tip of the 3.5mm jack and the other on the positive pin of the left wire (channel) at the IEM end, record the reading. Then place one probe on the lowest section of the jack (ground), and the other on the other pin at the IEM end and record the reading. Do the same for the right wire (channel) - from the middle section of the jack to the positive pin, and the lowest section of the jack (ground) to the other pin. Thanks
Oct 31, 2019
View Full Discussion