MaceTech RGB LED Shades Kit

RGB Shades

• Display area: 68 WS2812B RGB LEDs (16 x 5) logical matrix
• Display bit depth: 256-level PWM brightness control of each color on each LED
• Display brightness: Global brightness control of full array (up to 256 levels)
• Power supply: 5V 1A (through mini-USB connector)
• Battery life: ~3 hours on 2000 mAh battery pack, variable
• On-board processor: ATmega328P at 16MHz, Arduino-compatible bootloader
• Communications: Built-in FTDI USB-RS232 converter
• Auxiliary interface: I/O pins available for hacking
• Open source hardware

LED Shades

• Display area: 166 single-color LEDs (24 x 8 logical matrix)
• Display bit depth: 256-level PWM brightness control of each LED
• Display brightness: Global brightness control of full array (up to 256 levels)
• Power supply: 400 mAh Lithium-Polymer battery
• Battery life: 3 - 8+ hours depending on pattern and brightness
• Charging supply: Charge from any USB port, 250mA maximum drain
• Charge indicators: USB power and charging indicator LEDs
• On-board processor: ATmega328P at 8MHz, Arduino-compatible bootloader
• Communications: Built-in FTDI USB-RS232 converter
• Sensor input: Built-in ambient light sensor
• Auxiliary interface: TTL-serial and I/O pins available for hacking

RGB Shades

• LED front PCB
• Controller PCB
• Hacker PCB
• Frame PCB
• Hinge PCBs
• Heat shrink
• M3 hardware
• Hex wrench
• Nose pad
• Control cable
• Thin USB cable
• Soft carry case
• Instructions

LED Shades

• LED Matrix Shades
• Mini-USB cable
• Soft sunglasses case