MAKERbuino STEM Education Kit
MAKERbuino STEM Education Kit
bookmark_border
Where's the price?
To negotiate the best possible price for our customers, we agree to hide prices prior to logging in.
27 Sold
Product Description
Build your own handheld gaming device with the MAKERbuino STEM education kit. Available with or without assembly tools, the kit comes with a MAKERbuino board, an acrylic case, a 0.5-watt speaker, a lipo battery, an RS232 adapter board, an ATmega328P-PU microcontroller, a 128MB SD card loaded with games, a USB-TTL programmer board, and a variety of capacitors, switches, and resistors ... Read More
DIY Retro Gaming Console

Build your own handheld gaming device with the MAKERbuino STEM education kit. Available with or without assembly tools, the kit comes with a MAKERbuino board, an acrylic case, a 0.5-watt speaker, a lipo battery, an RS232 adapter board, an ATmega328P-PU microcontroller, a 128MB SD card loaded with games, a USB-TTL programmer board, and a variety of capacitors, switches, and resistors. The MAKERbuino board has an open-source interface that can be programmed with an Arduino or Arduino-compatible devices. In addition to all the device components, you’ll also receive detailed instructions for soldering the various electronic devices on the console. 

Note: At checkout, choose the MAKERbunio standard kit (base price) or the MAKERbuino kit with tools (+ $14.99). You’ll also have the option to add an assorted button cap pack (+ $3.99), a multiplayer link cable (+ $4.99). 

Kit With Tool (+ $14.99)
Button Cap Pack (+ $3.99)
Multiplayer Link Cable (+ $4.99)
Included

MAKERbuino Standard Kit

  • MAKERbuino PCB
  • Laser cut acrylic casing (consists of 3 pieces) 
  • (4) M3 nylon screws 
  • (4) M3 nylon nuts
  • (8) M3 6mm nylon hex distancer
  • (2) M2 nylon screws
  • (2) M2 nylon nuts
  • (2) M2 nylon spacers
  • 128MB Micro SD card + SD adapter
  • SD socket
  • Insulated wire for connecting the speaker
  • 8ohm 0.5W speaker w/ 28mm diameter
  • Li-Po battery (650mAh, single cell - 3.7V) with male JST connector 
  • Female JST battery connector (should already be mounted on the board)
  • USB to RS232 adapter board (serial programmer) 
  • 6-wire male to female cable for connecting the serial adapter board 
  • ATmega328P-PU microcontroller in PDIP package 
  • 28 pin PDIP IC socket (for the ATmega328P) 
  • LCD–Nokia 5110 LCD breakout board 
  • TP4056 micro USB Li-Po battery charger board
  • 3.3V voltage regulator (MCP1702-3302E in TO-92 package) 
  • 2n2222 general purpose NPN transistor (TO-92 package)
  • 16MHz crystal 
  • 1N4148 diode 
  • (2) 3 pin slide toggle switches 
  • (2) 100nF ceramic capacitors
  • (2) 22pF ceramic capacitors
  • (3) 100uF, 6.3V radial electrolytic capacitors
  • (7) pushbuttons with button caps
  • Standard double row 3x2 pin angle headers (male) - for SPI port
  • Standard single row 6 pin angle headers (female) - for Serial port 
  • (2) KF2510-4P angle male connectors - for i2c expansion ports 
  • Breakout standard double row 5x2 pin angle headers (male) - for breakout port
  • (2) 1Kohm wheel trim potentiometer
  • 2.2Kohm resistor
  • (2) 10Kohm resistors
  • (2) 4.7kohm resistors
  • 100ohm resistor
  • 3.5mm headphone connector socket

MAKERbuino Kit With Tools

  • MAKERbuino PCB
  • Laser cut acrylic casing (consists of 3 pieces) 
  • (4) M3 nylon screws 
  • (4) M3 nylon nuts
  • (8) M3 6mm nylon hex distancer
  • (2) M2 nylon screws
  • (2) M2 nylon nuts
  • (2) M2 nylon spacers
  • 128MB Micro SD card + SD adapter
  • SD socket
  • Insulated wire for connecting the speaker
  • 8ohm 0.5W speaker w/ 28mm diameter
  • Li-Po battery (650mAh, single cell - 3.7V) with male JST connector 
  • Female JST battery connector (should already be mounted on the board)
  • USB to RS232 adapter board (serial programmer) 
  • 6-wire male to female cable for connecting the serial adapter board 
  • ATmega328P-PU microcontroller in PDIP package 
  • 28 pin PDIP IC socket (for the ATmega328P) 
  • LCD–Nokia 5110 LCD breakout board 
  • TP4056 micro USB Li-Po battery charger board
  • 3.3V voltage regulator (MCP1702-3302E in TO-92 package) 
  • 2n2222 general purpose NPN transistor (TO-92 package)
  • 16MHz crystal 
  • 1N4148 diode 
  • (2) 3 pin slide toggle switches 
  • (2) 100nF ceramic capacitors
  • (2) 22pF ceramic capacitors
  • (3) 100uF, 6.3V radial electrolytic capacitors
  • (7) pushbuttons with button caps
  • Standard double row 3x2 pin angle headers (male) - for SPI port
  • Standard single row 6 pin angle headers (female) - for Serial port 
  • (2) KF2510-4P angle male connectors - for i2c expansion ports 
  • Breakout standard double row 5x2 pin angle headers (male) - for breakout port
  • (2) 1Kohm wheel trim potentiometer
  • 2.2Kohm resistor
  • (2) 10Kohm resistors
  • (2) 4.7kohm resistors
  • 100ohm resistor
  • 3.5mm headphone connector socket
  • Diagonal cuting pliers
  • Screwdriver
  • Needle-nose pliers
  • USB soldering iron
  • USB cable
  • Metallic soldering iron holder
  • Small sponge 
Shipping

All orders will be shipped by Drop.

Estimated ship date is July 10, 2019 PT.

After this product run ends, payment will be collected and orders will be submitted to the vendor up front, making all orders final. Check the discussion for updates on your order.

Recent Activity
Placed an order
Placed an order
Placed an order