Showing 1 of 7680 conversations about:
pwnerman
415
Nov 4, 2016
bookmark_border
is the clamping force on these going to be the same as the HD650? I'm asking because I only have the 650 to reference and I hated the clamping force on those.
Nov 4, 2016
jxliu
1015
Engineer
Nov 4, 2016
bookmark_border
For the 600/650/6XXs, you can bend the metal part of the headband to lessen the clamping force. Extend the headband all the way and slowly bend just the metal part outward. Make sure not to bend the plastic part of the headband because you might crack the plastic. Adjust it a little at a time so you don't widen it too much.
Once I did this with my HD 650s, they were a lot more comfortable.
Nov 4, 2016
Moneyhats
0
Nov 4, 2016
bookmark_border
From what I read from reviews, they do have fairly tight headband.
Nov 4, 2016
eddd
26
Nov 4, 2016
bookmark_border
I found my HD650's to be uncomfortably tight at first, but they did loosen up over time, so they're pretty comfortable now.... or you could just bend them as suggested by jxliu
Nov 4, 2016
tradyblix
23
Nov 4, 2016
bookmark_border
Do not try to bend the 600's. That is bad advice. It is a hard plastic that can easily snap if you're used to bending headphones. Just extend it and live with it for a while on your head, you'll adjust and it will also loosen up with time to become comfortable. My 600s were strong clamp at first but now they're much looser after about a month
Nov 4, 2016
View Full Discussion