Showing 1 of 1927 conversations about:
ElyCaroom1
0
Oct 27, 2016
bookmark_border
Would these work with the dark voice drop as well?
Oct 27, 2016
TheChrisAge
31
Oct 27, 2016
bookmark_border
I use these on a tube amp and it definitely changes a lot. Personally, I enjoy it.
Oct 27, 2016
EniGmA1987
556
Oct 27, 2016
bookmark_border
If you get the 336SE you will need to mod it to use these headphones. Stock you would lose a TON of the low end with that amp due to the design. You will want to remove the three 10uF capacitors and replace them with either a 220uF, or maybe even a 330uF capacitor for these 19ohm headphones. That is the only way you will get any kind of decent low frequency response from the amp. Remember to use 100v or higher rated capacitors (100v is best for size constraints) since the amp has around 70v present running through the capacitors there.
Many people have also liked the sound with 100uF bypass caps installed. You can look up the mods if you want to do those too.
Oct 27, 2016
ElyCaroom1
0
Oct 28, 2016
bookmark_border
thanks!
Oct 28, 2016
View Full Discussion