HojaeyoDo you know if the Audeze iSine20 has 0.76mm or 0.78mm diameter pins?
Not sure how the angle on the connectors would work with that earpiece build...
Has anyone used Null Audio cables on the iSine20? If yes, may work...
CEE_TEEI found the following on the official website of Audeze, headphones technical questions:
While the LCDi4 and iSINE's two-pin connectors aren't proprietary and many standard ones will work, we did throw in a small twist that's important to note:You'll notice a groove on the connector of the cable (under the L and R on the iSINE cable), and a corresponding tab inside the headphone connector. This is to ensure correct polarity. When using any aftermarket connector/cable, it's important to make sure the connector fits within this tab so it doesn't damage the connector inside the headphones, as this would not be covered by warranty. The recommended dimensions for connectors without this groove is 2.5mm x 5mm, and the pins are .75mm in diameter.
m.allamin7Ah- 0.75mm pins are the smaller ones...this cable might stretch out the iSine20 sockets.
We found most of the 2-pin connectors out there seemed to be 0.78mm diameter, so we chose that route.