Showing 1 of 754 conversations about:
View Full Discussion
Does anyone happen to know the size of the hex screws for the plate? I have an issue where when I tried to instal the acrylic diffuser the screws cannot catch and secure the case together. Seems like the threading for the case is no good. Hoping to get longer screws which may solve the issue, I'd hate to return it.
There are two screw sizes and three types.
Source: Q&A section of this product
- To mount the bottom of the case to the top, they are M3 socket head cap screws, hex driver. Approximately 8mm long, but if used with the acrylic diffuser they may not be long enough. Mine were, but with very little thread engaged. I would replace them with 10mm screws if using the diffuser.
- To mount the stabilizers to the PCB, M2, 4mm long, cross driver. Silver in color.
- To mount the PCB to the case, M2, 4mm long, cross driver. Gold in color.
Thank you so much! I was able to find longer M3s at the hardware store, definitely has helped. Thanks again!
You're welcome! Glad to hear it worked out wonderfully. I replaced my outside case screws with black Torx screws and it looks absolutely stunning with the Gyoen green colorway.