PLX SM-AFR Wideband + MultiGauge Link Combo
Real-Time Data from Your Smartphone
With this handy combo, you can monitor your wideband air fuel ratio from your smartphone, which gives you a larger screen, more customization, software upgradability, and an easier interface to navigate. It works with gasoline, diesel, methanol, ethanol, and LPG for maximum compatibility. Use it in tandem with the included MultiGauge Adapter to wirelessly send sensor data to your smart device (Android or iOS) and get real-time data, eliminating the need to install dedicated gauges. The app automatically detects your PLX sensor modules and configures your gauges for you.
Specs
- PLX
- Ap is compatible with Android and iOS
- Employs PID critically damped technology
- Accurate to less than 0.1AFR
- MultiGauge reports both 0-15 PSI and 0-30 PSI boost ranges in both imperial and standard
- Works with gasoline, diesel, methanol, ethanol, LPG, E85. 0-5V analog output interfaces with 3rd party ECU’s and data loggers
- Proprietary IntelliHealth algorithm detects your sensor’s remaining life and reaction time
- Fully plug and play
- Installation requires no manual calibration
- Individually hand tested
SM-AFR Wideband O2 Controller
- Enclosure: Automotive-grade plastic
- 12V power input
- 4-prong analog clip
- Termination jumper
- Serial RX plug (in)
- Serial TX plug (out)
- Sensor input clip
- Technology: PLX critical-response technology, fast response PID
- Accuracy: < 0.1AFR (gasoline) wideband, < 0.2AFR (gasoline) narrowband
- Measurement range: 10-20 AFR (gasoline), 0.68 - 1.36 lambda (gasoline), 0 - 100 O2 sensor health, 0 - 1000 ms reaction time, 9 - 20 V
- Analog outputs: Wideband linear 0-5V, narrowband 0-1V (driving current 20mA)
- Operating voltage: 9-20V
- Power consumption: 20 watts (max), 13 watts (typical)
- Power supply technology: High-efficiency switching with soft-start technology
- Operating temperature: 0 - 85ºC
- Sensor: One Bosch LSU 4.9
- Dimensions: 2 x 2.9 x 1.1 in (5.2 x 7.5 x 2.8 cm)
MultiGauge Link
- Voltage: 3.3V
- Power consumption: 0.1 watts
- Bluetooth 4.1
- Serial interface: 19200 Baud 8N1
- Range: ~50 ft line of light
- Operating temperature: 0 - 80ºC
- Updatable firmware over the air
- Dimensions: 0.2 x 0.6 x 1.2 in (0.3 x 1.5 x 3 cm)
- Cable length: 2.5 in
Included
- SM-AFR main unit
- Bosch LSU 4.9 wideband sensor
- O2 sensor harness 10ft
- 4ft power wire with 2.1mm connector
- 4ft analog wires and connector with 4 terminals
- 1ft serial cable termination jumper
- User manual
- DM-6 2 1/16" (52 mm) gauge
- 4-pin connector for SM-AFR connectivity
- Terminals for 4-pin connector
- (O2 Bung and cap sold separately)
Shipping
Estimated ship date is July 20, 2017 PT.
Payment will be collected at checkout. After this product run ends, orders will be submitted to the vendor up front, making all orders final.
Ask the Community!
