Drop + OLKB Preonic Keyboard MX Kit V3
$119
$150

Drop + OLKB Preonic Keyboard MX Kit V3

bookmark_border
$119
$150
Members who purchase earn
357
Drop Rewards
Drop Keyboard Club Members save a minimum of $20 on this item with their annual membership. Learn more
Case Color:
Black
Complete Setup:
add
Acute Keycap Set
add
Switches (70 pack)
add
Carrying Case
·
7.7k Sold
·
Free Returns in USA
Review Highlights:
expand_less
star_borderstar
star_borderstar
star_borderstar
star_borderstar
star_borderstar
My absolute favorite
Easily my favorite keyboard form factor of all time. It has everything I need and nothing I don't use (and layers for things I want but don't use often). It's small enough to slip into my carry-on bag for work trips, or just in my backpack for when I'm going to chill at a coffee shop. Construction-wise, the Preonic Rev. 3 is built like a tank. Make sure you save the tiny pamphlet in the box, it has the assembly instructions. Personally, I go for the ultra-secure plate method. This uses the provided bolts and spacers to make the plate firm within the case. The plate is a hefty stainless steel plate with a tight tolerance. It will take some force to push the switches in. BE WARNED! The hotswap brackets for the switches can come off if you push too hard. I have made 4 of these model and have never had the issue, but it has been known to happen. The recommended method is to put a few switches in the plate, then line them up with the PCB, then place the remaining switches in place by putting your finger on the back of the PCB to hold the black hotswap in place while you use medium force to push the switch into the plate. This reduces the risk of popping off a hotswap. The board is programmed with QMK, but make sure when flashing it that you use the Rev 3 firmware. Rev 2 used a different micro controller and the firmware and layouts aren't compatible. I would love to do a write-up on QMK, but it's a bit complicated to set up and there are a million different things you can do with it. If you have questions, you can always ask on the OLKB subreddit (reddit/r/OLKB). Search first! Your question has probably already been asked and answered, but if you're really not sure just make a new post. People will usually help, but it's not super active so it may take a day or two to get a response. Included is a picture of my collection, which is just about a year old. I have quite a few more now...
check
Would recommend to a friend.
star_borderstar
star_borderstar
star_borderstar
star_borderstar
star_borderstar
This is my first orhtolinear, and three days in I'm really liking it. I'm still in the process of figuring out where I want keys to be, and am _really_ liking the MOD_T setup (i.e. left-shift on hold, enter on tap, etc). From what I can see, it looks like there is a little solder on the USB-C connector, though that piece still makes me a little nervous. I got a magnetic cable set ( https://amzn.to/2Eup4dR ) so there isn't any strain on the connector. Since I pack this from work to home and back, it's great for the convenience factor alone.
See all 671 reviews
Q&A Highlights:
expand_less
Do I need to assemble this myself?
Yes, but no soldering required to get a basic keyboard with switches.
LED ready--meaning LEDs need to be soldered to the board (yes/no)?
The board comes with presoldered addressable LEDs around the edge of the board, other than that there is a cutout under each switch where you could put LEDs but there is nothing else other than the hole. If you wanted per switch LEDs you'd have to wire them separately.
See all 119 questions

A Mech Keys Favorite, Now Even Better

The original Preonic keyboard was praised for its build quality, compact form factor, and intuitive layout—and the new version is no different. However, this time around we're offering the CNC-aluminum case in your choice of five colors, including the striking new purple colorway. What's more, this version has a new ARM STM32 processor that provides more power to the PCBA and the USB-C connector. Another upgrade? The new Preonic has Kaihua hotswap sockets (which support grid 2x1u, 1x2u, and 2x2u bottom row layouts) so you can swap out your switches whenever you want without even picking up a soldering iron. Plus, If you’re new to keyboard kits, the compact Preonic is a great way to learn about keyboard programming.

Note: The base price excludes both switches and keycaps.

Drop + OLKB Preonic Keyboard MX Kit V3
Drop + OLKB Preonic Keyboard MX Kit V3
Drop + OLKB Preonic Keyboard MX Kit V3
Drop + OLKB Preonic Keyboard MX Kit V3
Drop + OLKB Preonic Keyboard MX Kit V3

The Theory Behind It

Designed by Jack Humbert at OLKB, the Preonic is made for efficiency. The layout is very similar to the Planck (also by OLKB), but with an additional row for easier access to numbers, function keys, or whatever else you’d like to program. The smaller space bar makes it easier to use your thumbs to access additional layers via the “raise” and “lower” keys. And even with the extra row, the keyboard still maintains a very compact form factor for portability.

Drop + OLKB Preonic Keyboard MX Kit V3
Drop + OLKB Preonic Keyboard MX Kit V3
Drop + OLKB Preonic Keyboard MX Kit V3
Drop + OLKB Preonic Keyboard MX Kit V3
Drop + OLKB Preonic Keyboard MX Kit V3
Drop + OLKB Preonic Keyboard MX Kit V3

New Plate, No Problem

Now we’re offering an MX plate which supports the 1 x 2u, 2 x 2u, and Grid layout. The plate design even allows you to swap out switches on the fly. Thanks to the Kaihua hotswap sockets, replacing switches is completely plug and play, so you never need to worry about tedious soldering—not to mention all layouts are fully supported. Made from 304 stainless steel, the plate is heavy and stable, with five holes for mounting the included M2 screws.

Drop + OLKB Preonic Keyboard MX Kit V3

Beeps & Boops

Also notable, the PCBA is outfitted with a small speaker, which is driven by the MCU. In the default firmware this will make a few different noises—like a short series of beeps on startup, notifications when you put the board into Device Firmware Upgrade (DFU) mode, plus noises when you change the default layout to prevent mishaps when typing quickly. The speaker can be disabled by a keyboard shortcut or by flashing new firmware. This version also has pre-populated bottom-lit LEDs and allows for expanded functionality with footprints for things like DIP switches, power adapter plugs, Qwiic connectors, and more. For more information, check out the QMK documentation and the specs section below.

Drop + OLKB Preonic Keyboard MX Kit V3
Drop + OLKB Preonic Keyboard MX Kit V3

Case Color Options

Build Guide made by a community member

Specs

  • Designed by OLKB
  • Produced by Drop
  • Anodized CNC aluminum case
  • PBT keycaps
  • ARM STM32 processor
  • Reprogrammable Matias / MX-compatible PCBA
  • 304 brushed stainless steel top plate
  • Rubber feet
  • Dimensions, assembled: 9.1 x 4.1 x 0.9 in (23.1 x 10.4 x 2.3 cm)

PCBA

  • Pre-soldered
  • Pre-programmed
  • 9x bottom-lit RGB LEDs: RGB LEDs that glow through the bottom of the case (acrylic cases would be preferred)
  • Standard layout
  • Cherry MX and Matias/ALPS switch footprints
  • LED ready
  • Built-in speaker

PCBA Footprints for Extra Capability

  • Footprint for a 4-channel DIP switch (210-4ES): A DIP switch is just 4 little switches combined into one (the Poker has one for settings)
  • Footprint for a 2-pin JST-PH (PRT-09749): This is a power adapter plug for wireless builds (Bluetooth, etc.)
  • Footprint for a 4-pin Qwiic (I2C) JST-SH connector (PRT-14417): Makes it compatible with Sparkfun’s Qwiic system
  • Footprint for a clickable (worked into the matrix) rotary encoder (COM-09117, et al): This will spin and click to allow even more customization
  • Footprint for a 6-pin male/female header (PRT-09015 or PRT-12590, et al): For development and DIY projects

Included (Base Price)

  • PCBA
  • Steel plate
  • CNC case (anodized if aluminum)
  • USB-A to C cable
  • PCBA-mounted stabilizers
  • 5x M2x14 mm Phillips flathead machine screws
  • 5x M2x3.5 mm brass spacers
  • 5x M2 nuts
  • 4x rubber bumpons
  • 1x socket wrench tool

IMAGE DISCLAIMER

 Images are for illustration purposes only. The color(s) of the final product may differ slightly.

RETURNS—NO QUESTIONS ASKED

We get it. Sometimes what you ordered just doesn’t work out. If that’s the case for you, don’t fret! All customers (both US and international) may return this item in new, unused condition within 30 days of delivery.

Shipping

Estimated ship date is Aug 24, 2022 PT.

Payment will be collected at checkout. Cancellations are accepted up to 2 hours after checkout for in-stock items, or up until pre-order ships.

Top Customer Questions119
search
close
Question
what is the limit of the number of writes to the on-board ROM? i.e. how many times you can flash the firmware before the device turns into a brick?
Jan 17, 2020
Top Answer
OrangeShadow
207
From what I could find out the Preonic uses the STM32F303 microcontroller. According to the datasheet, the flash has minimum endurance of 10k write cycles (page 82).Read More
Mar 11, 2020
See 5 More
Question
Do I need to assemble this myself?
Nov 6, 2019
Top Answer
jooks
53
Yes, but no soldering required to get a basic keyboard with switches.Read More
Nov 12, 2019
See 6 More
Question
Is the acrylic case frosted?
Dec 2, 2019
Top Answer
Dec 10, 2019
Showing 3 of 119 questions
View All Questions
User Photos527
kaznai
2 drops 1 pic
newtonapple
My “small” collection.
irevoire
rainbow keycaps
radmedov
Godspeed Preonic
p_ys
Preonic + MT3 Serika
legolandalf
Trying to decide if I'm brave enough to solder some LEDs for underglow. Enjoying it as is for now with SA Snow Caps from PMK.
rishita
Frosted acrylic + halo clears + np crayon pbt caps
Ilumeo
Preonic with Rama works Grid keycaps
t1meout
It's lovely
giraid
Godspeed, color matched
radmedov
Godspeed Preonic
bomberstudios
Orange Everything
Customer Reviews0
All of our reviews are from verified customers.
Showing 0 of 671 reviews
Recent Activity
Placed an order
Placed an order
Placed an order