Click to view our Accessibility Statement or contact us with accessibility-related questions
Royal Glam 60% Wood Keyboard Case

Royal Glam 60% Wood Keyboard Case

bookmark_border
Where's the price?
To negotiate the best possible price for our customers, we agree to hide prices prior to logging in.
3.7K requests
·
308 Sold
Product Description
An excellent alternative to the harsh lines and cold feel of machined metal, this hardwood case by Royal Glam is built for standard 60% keyboards. It comes in two variations—one with a built-in wrist rest and one without Read More

Customer Reviews

3.1
(14 reviews)
5star
(3)
4star
(1)
3star
(6)
2star
(2)
1star
(2)
search
close
Bandi427
4
Oct 15, 2021
checkVerified Buyer
Missing screws, universal fitment style hole for connection cutout
The case itself is nice, precision cut, didn't have an issue getting the PCB in or anything, but the hole that's cut out for the USB-C is really big for no real reason. In addition, I did not receive any screws. Thankfully I had a previous keyboard build I wasn't using and I just used the screws from there.
Recommends this product? No
chacholatte
4
Feb 18, 2021
checkVerified Buyer
Misalignment
Some misalignment on the scew locations. This is the second one I got, first one I got was better aligned with my 60% Pok3r
checkVerified Buyer
Dark walnut
Well, the dark walnut case is beautiful. A couple of issues with this case however. The wood was unprotected. no oil, no coating, no nothing. This case has the standoffs flush with the bottom, so you're limited on PCB choice, and you have to be careful to screw the PCB down! The hole in the bottom for the reset switch wasn't drilled through. The hole in the back for the USB port is sloppy. The included screws are not magnetic, a total pain in the backside! The wrist rest part of the model with wrist rest build in, is a little short for me personally. However I do still have the keyboard I've build in this case (joined this GB a few years ago)
search

Recommends this product? No
checkVerified Buyer
I purchased the black walnut with wrist rest.
I was able to get 4/6 screws in and the USB cutout is fine. No rubber feet were included in my unit contrary to the pictures/description.
2/5 stars due to the price and the vendor's failure to response to legitimate criticisms of their product on Massdrop. Frankly I think that this drop is a gamble for $80 and I lucked out that my unit was more workable than others which I've seen described on here.
d_stilgar
15
Jun 14, 2018
checkVerified Buyer
I can get all six screws in, but then the plate is pushed too far to the right and the right ctrl key jams up with the case. If I only use three screws, I can get it to fit centered in the opening. The USB cutout on the back is simultaneously too big and cut a little rough. It's not that it's awful on its own, it's that it's awful for $80. For that price it should be more precise than it is.
goodthymes
101
May 22, 2018
checkVerified Buyer
Received my maple case today, about two months ahead of listed ship date(which is great in this hobby of pay and wait..and then wait some more). Over all the build quality itself isn't bad for the price - but not great. Just a couple of nickpicks that possibly has to do with the nature of the wood itself for my particular case(maple): the case is warped and will rock slightly along the bottom right, and a small dent along the outer edge. Both are fixable I think with a little elbow grease, so it's not of great bother to me.
Another point of note for me is the sound. The wood reverberates and intensify whatever sound your board makes and it can be loud depending on the pcb/plate/switches combo you are using. My case is the wrist-restless model and the screw posts are not on risers so there's no room for dampening material, a slight unfortunate design deviation in my opinion.
I also have the kbdfans' wood case and it is just overall a better product in comparison, plus it comes with a matching wrist rest. The only catch and it's a major one for me is that it's not a high profile, which this RG case is.
Potato pic of installed case below:
search
hypersprite
151
May 6, 2018
checkVerified Buyer
I do like that this is a high profile case, I hate floating KBs because they seem unfinished and in the case of RGB KBs, I don't like the light reflecting off my screen. External quality is ok if you don't look too close. For instance one side might be slightly rounded while the other side is perfectly square. I've had half a mind to take a router to the outside edge and add a 1/8" radius all the way around just to make it even, but then I'd need to sand the whole thing down and refinish it and I haven't had the time.
My first Royal Glam is the maple without the wrist rest. It seemed great until one day I turned the KB upside down because a crumb had fallen between the keys and my board just fell out. I glued the standoffs back in with two part epoxy and it has been fine.
I bought another one with the wrist wrest figuring I would just epoxy them in again from the get go but this time they came glued in with gorilla glue. The problem with Gorilla glue is that it expands as it cures and it filled up three standoff threads so there was no way to put screws in them. I ordered some new M2 standoffs and epoxied them in and everything is fine but I probably won't buy Royal Glam again.
hypersprite
151
Aug 3, 2018
hyperspriteUpdating this: On my wrist wrest version, the finish is degrading on the wrist wrest itself. It feels like raw wood now and will need to be refinished at some point. It's only been a few months. Still would not recommend to a friend.
rychubil
21
May 1, 2018
checkVerified Buyer
search

search
Nice solid wood :)
joshuacre
6
Nov 10, 2021
checkVerified Buyer
checkVerified Buyer
Recommends this product? Yes
Showing 11 of 15
keyboard_arrow_up
Newest
15 OF 15 POSTS
keyboard_arrow_down
Oldest
Recent Activity
Placed an order
Placed an order
Placed an order
Related Products