Seeed Grove TF Mini Lidar & Seeeduino Lite Bundle
Accurate Awareness
Based on time of flight (TOF), the Seeed Grove Mini Lidar is backed by particular optics, electricity, and design, allowing it to measure distance with sensitivity, precision, and speed. Ideal for holding a drone’s altitude, terrain following, and measuring distance, it gives you accurate readings of your surroundings to help you better understand them. It’s capable of measuring up to 12 meters and is accurate to within 1 percent of the distance within 6 meters. This drop also includes the Seeeduino Lite, a microcontroller board based on the Atmega328 chip, which is used in the Seeeduino. It has 20 digital I/Os, a micro USB connection, a power jack, an ICSP header, and a reset button. Just connect it to a computer with a USB to start it up.
See It in Action
Specs
Seeed Grove TF Mini Lidar
- Operating range: 0.3–12 m
- Maximum operating range at 10% reflectivity: 5 m
- Average power consumption: 0.6 W
- Applicable voltage range: 4.5V-6V
- Acceptance angle: 2.3°
- Minimum resolution ratio: 10 m
- Frequency: 100 Hz
- Accuracy: 1% (less than 6 m), 2% (6–12 m)
- Distance detection unit: mm
- Laser wavelength: 850 nm
- Operating temperature: -20–60ºC
- Light sensitivity: 70,000 lux
- Communication interface: UART
- Laser safety class: FDA Class Ⅰ
- LED peak current: 800ma
- Electromagnetic compatibility (EMC): EN 55032 Class B
- Battery: Excluded
- Dimensions: 1.6 x 0.6 x 0.6 in (3.6 x 1.5 x 1.6 cm)
- Weight: 0.35 oz (10 g)
Seeeduino Lite
- Each of the 20 digital i/o pins on the Seeeduino Lite can be used
- A micro USB provides power and data to the board
- Grove compatible
- Selectable I/O output voltage: 3.3V or 5V
- IIC and SPI jumper
- Dimensions: 4.5 x 2.9 x 1 in (11.5 x 7.5 x 2.5 cm)
Included
- TF Mini Lidar
- Grove cable
- Seeeduino Lite
Shipping
Estimated ship date is Feb 15, 2019 PT.
Payment will be collected at checkout. After this product run ends, orders will be submitted to the vendor up front, making all orders final.
Ask the Community!
