TEAC TN-420 Tie-Dye Turntable
Far Out!
Released on the 50th anniversary of San Francisco’s Summer of Love, the TEAC TN-420 tie-dye turntable has a groovy look that’s sure to be a huge hit in any music room. But don’t be fooled by its colorful, laid-back finish—beneath the tie-dye, this belt-driven two-speed turntable with an S-shaped tonearm has all the great features an audiophile could want. The high-density MDF base and heavyweight aluminum die-cast platter deliver excellent resonance rejection, speed control, and fidelity. Known for its accuracy, clarity, and detail, the Audio-Technica MM-type cartridge has a built-in phono equalizer amplifier. The anti-skating system prevents tracking errors, while the USB digital output makes it easy to archive your vinyl collection. Finally, switchable phono and line-level outputs allow you to connect to virtually any audio system.
Note: This drop is limited to 100 units.
Specs
Turntable
- Drive system: Belt drive
- Motor: DC motor
- Speed: 33 ⅓ RPM, 45 RPM
- Rotation speed variation: +/- 2%
- Wow and flutter: 0.2%
- Signal-to-noise ratio: 67 dB or higher (A-weighted, 20 kHz LPF); 60 dB or higher (unweighted, 20 kHz LPF)
- Platter: 12 in (30 cm) aluminum die-cast
Tonearm
- Type: Static balance, S-shaped
- Effective arm length: 8.8 in (223 cm)
- Stylus pressure range: 0–5 g
- Supported cartridge weight: 3.5–6.5 g
- Anti-skating adjustment: Supported
Cartridge
- Type: MM type (Audio-Technica AT95E factory installed)
- Stylus shape: Elliptical
- Stylus construction: Bonded round shank
- Mount: Half inch
- Frequency response: 20 Hz–20 kHz
- Channel separation: 20 dB at 1 kHz
- Channel balance: 2 dB
- Tracking force: 1.5–2.5 g
- Vertical tracking angle: 20º
- Supported load impedance: 47 kohms
- Output voltage: 3.5 mV (1 kHz, 5 cm/sec)
- Stylus pressure: 2 g +/- 0.5 g
- Cartridge weight: 5.7 g +/- 0.5 g
- Headshell weight: 10 g (including screws, nuts, and wires)
- Replacement stylus: Audio-Technica ATN95E
Analog Output
- Connector: RCA pin jack (gold-plated)
- Output voltage: Phono/line switchable
- Phono output: 4.5 mV +/- 3 dB
- Line output: 120 mV (-13 dBV)
USB Output
- Connector: USB B type
- Output signal: PCM 48 kHz / 16 bit
- Supported OS: Windows 7, 8, 8.1, and 10; OS X Lion (10.7), Mountain Lion (10.8), Mavericks (10.9), Yosemite (10.10), and El Capitan (10.11); Mac OS Sierra (10.12)
Additional Specs
- Phono equalizer amplifier type: MM type (on/thru switchable)
- Power: AC 100–240V, 50/60 Hz
- Power consumption: 1.5W (less than 0.5W at standby)
- Overall dimensions (W x H x D): 16.5 x 4.6 x 14 in (420 x 117 x 356 mm)
- Weight: Approx. 10.8 lbs (4.9 kg)
Included
- Felt mat
- EP adapter
- Counterweight
- Headshell (Audio-Technica AT95E)
- Platter
- Dust cover
- 2 rubber feet for dust cover
- 2 hinges
- RCA audio cable
- AC adapter (GPE053A-120050-1)
- Owner’s manual
Shipping
Estimated ship date is Jan 8, 2018 PT.
Payment will be collected at checkout. After this product run ends, orders will be submitted to the vendor up front, making all orders final.
Ask the Community!
