I thought a fun little Xmas project would be to add a virtual numeric keypad to a ten-keyless keyboard. In my case, the DROP CTRL. But it should work with any 87 or 88 key keyboard (i.e., has the insert/delete/.../PgDn cluster and cursor keys). I chose a TKL over a full width keyboard because I don't need the numpad all that much and having it there pushes my mouse too far to the right to my taste. Should I really need a numpad for a few hours, I'd use a different keyboard. If I should ever need one very often, I'd get a separate numpad so I can put it whereever I want. But... there are times where this is overkill and it's still nice to be able to type numbers a bit more easily than using the number row. I'm a pretty good touch typist but using the number row is still a bit too error prone. Especially when copying numbers from paper or another window so you're not looking at what you're typing. Ok, so what's the deal? Simple: create a layer with the following key...

One of Jack Kester/Pikatea's Many Boards That He Brought To The 2024 Iowa Meetup The mechanical keyboard hobby is fantastic. Whether you’re someone that originally wanted to upgrade your desk setup with a cool-looking board, or someone that found the hobby because of ergonomic reasons, there are many ways that we found the hobby - and many more reasons why we’ve stayed in the hobby. However, you can definitely get overwhelmed by the vast amount of information. OR, you may burn out and realize the time you’re spending negatively impacts your life. I’m hoping that by sharing my own experiences and tips, I can help newcomers and enthusiasts avoid those situations. Everyone enjoys the hobby in their own way, and that’s fine - as long as it doesn't negatively impact your life. Let’s take a look at these 5 tips, and remember, these are just my personal opinions! Tip 1: Don’t Bankrupt Yourself I think this is important during the whole year, but especially because we’re...

Figure 1: Oh yeah, I meant it when I said obscure... There’s no doubt that mechanical keyboard switches have gotten increasingly better in their stock forms over the past half decade of releases. Despite switches now having tighter manufacturing tolerances, smoother factory lubing, and overall higher quality per dollar spent, aftermarket modifications of switches is still one of the most discussed topics by people freshly joining the hobby today. This hyper fixation on switch modding is due in no small part to the glut of keyboard content creators that produced videos, shorts, and all manner of content during the peak of COVID talking about the art and science behind lubing and filming for switches. For a while there, it almost seemed as if you had to have some content about lubing, filming, and/or ‘frankenswitching’ switches if you wanted to cut it as being a true keyboard content creator in the space. However, as people like this have flooded the internet with...

Making your keyboard work for you! When shopping for a new keyboard you may have heard that you want to have a keyboard that is compatible with QMK, VIA, or VIAL. These are three different programs that allow you to modify the assigned keys on a keyboard. This is one of the major advantages of using a custom mechanical keyboard and one that I feel is criminally underused. Making small adjustments to your layers can allow you to tune your keyboard to your exact specifications. For example, I always swap the position of left control and caps lock. I’ve always felt that caps lock was a waste of such a valuable space. For those of you that read some of my earlier articles, you’ll know that my first mechanical keyboard was a Happy Hacking Keyboard. As you’ll see later on, my personal layouts are heavily inspired by this keyboard, even going so far as to mapping my backspace to the pipe key on nearly every single physical layout, yes including tenkeyless. Today, I hope you can take away...

I don’t think this is an article. I’m pretty sure it’s the beginning of a book. The "technology" section of every thrift store is a potential treasure trove. Swap meets, estate sales... they're the same. I honestly enjoy sifting through stacks of typewriters, radios, turntables and dusty old keyboards... hunting for treasure. That's what has led me to ask my friends in the hobby a pair of simple but nuanced questions… what’s your dream thrift store find and what’s your holy grail? It turns out, that for many, that’s the same question. For a lot of people in this hobby, finding the perfect board for you happens at some point, and rather than staring at your collection of boards on the wall, or continuing to buy keyboards until your room looks like Wall-E’s trailer… Instead, mature keyboard hobbyists tend to do a number of things: Sell/trade artisan keycaps Purchase keycap sets Sell or trade rare/nice (and sometimes new) keyboards to keep things fresh Most of us haven’t...

Welcome back to our series on designing custom keymaps! After looking into how good/bad QWERTY is, the power of layers, and the potential of custom keymaps, last time we took the first real step by examining your options for compiling a corpus. As a recap: The corpus is simply a big chunk of text. We use this collection of textual data, often a single text file, to characterize your typing habits (calculating various language statistics), and feed it directly or indirectly as an input into layout optimization algorithms – to find the optimal keymap for you! Today we’ll expand on this idea by exploring your options if, like me, you prefer a personalized corpus rather than grabbing some general (and mostly irrelevant) data available online. Image 1: Letter frequencies – the most basic use of corpora – in this very post We've seen that a well-crafted, personalized corpus plays a key role in determining the outcome of the optimization process. We've also explored...

Figure 1: This is the keyboard of someone (0range) who clearly knows how to ask proper questions. Over the past couple of weeks, I’ve been lurking around the channels of a couple of different entry level keyboard forums and I have to admit that the experience is quite bleak. I’m not saying this because of “toxicity” or people being given wrong information, rather I see so many people’s questions going unanswered… and to be honest they’re kind of to blame for it. While I recognize that not everyone coming freshly into the keyboard space enters it with the same level of inquisitiveness that I did when I first joined back in 2017, these questions going unanswered really feel way under-thought or over-thought compared to where I was. On one hand, you get questions like this: What is best gaming keyboard? And on the other hand, you get questions like this: Hi, there everyone! I am just now starting to look into mechanical keyboards as an avid gamer and I need some help in...

In this series we are designing our own custom keymaps, logical layouts, you name it. We’ve laid the groundwork by looking into how good/bad QWERTY is, the power of layers (SpaceFN), and also the huge potential of alternative layouts and custom keymaps. Today, we take the first step in designing your ultimate keymap by exploring our options for compiling a corpus.  What's a corpus? Essentially, it's just a fancy term for a big chunk of text. In this context it means a usually large collection of textual data used directly or indirectly as an input for our layout optimization algorithms. Often literally a single text file. Why does it matter to you? Because a well-crafted, personalized corpus is crucial for keymap wizards. If you're aiming to design your own custom logical layout, the corpus plays a key role in determining the language statistics that reflect your typing habits, thus the outcome of the optimization. These statistics, which we extract through analysis of...

Fear and loathing on a PCB At a recent keyboard meetup I was talking to someone very new to the hobby and they said that they bought a board and were surprised to discover that it was not hotswap. They were really intimidated by the idea of soldering their switches into their keyboard. Turns out, for some people, whipping out a blazing hot metal stick and possibly wrecking your expensive purchase gets them jittery. All kidding aside, for the first year or so in the hobby, I purchased exclusively hotswap keyboards, avoiding soldering for a couple reasons. Firstly, I didn’t want to commit to any one switch. I liked clicky a lot early on (still do if I’m being honest) but I saw that the folks who had been in the hobby for longer moved away from clicky, and I predicted accurately that I too would do the same. Secondly, I was just coming to terms with what it cost to buy and build a keyboard, and soldering seemed like an unnecessary risk. I can trace my initial...

Over the years of collecting mechanical keyboard switches, I’ve been lucky enough to have encountered dozens upon dozens of rare and unique ones that have stuck in my mind to this day. Prototypes, factory errors, and even a few switches so rare that there is literally zero documentation about them anywhere in the world all fill that personal list from top to bottom. However, I realize that talking about switches so far outside of most people’s reaches, and even sometimes my own grasp, doesn’t make for the most exciting of articles about switches. To this newest generation of keyboard enthusiasts, though, there is one pretty rare MX-style switch which has made its way to the top of everyone’s “must try” lists – Cherry MX Locks. These often undiscussed and even more rarely seen switches are something that few people have seen and even fewer have had the chance to try at a meetup before. However, the list of people who really know how these unique Cherry switches work is even shorter...

I must have watched this GMMK Pro pre-sale build video from a YouTuber named IO Sam a dozen times before I pulled out my wallet and pre-ordered it. In retrospect, I learned a great deal about building keyboards from Sam’s straightforward, professional delivery. I watched and re-watched sections I didn’t understand, and certain phrases and moments in the video stuck with me in ways where I still think about them. Especially at 23:10, when he compliments the MT3 White on Black keycaps with an actual chef’s kiss, locks eyes with the camera and says “Perfecto.” (I still do that whenever I put MT3 WOB on a board.) In that video, IO Sam introduced me to DROP, when he referenced the MT3 WOB’s and the GMK Kaiju keycaps that he set the Glorious GMMK Pro up with. I was in love with the look and feel of the MT3 profile. (I still am, as you can read in my previous article “In defense of MT3”) As a life-long Godzilla fanatic, I fell head over heals for GMK Kaiju. In the latter parts...

Figure 1: Are these even long pole? I don't know, but they're really serving 'long pole vibes'. Something tells me I should probably be a little more rigorous about them than that though.. Honestly, I’m a tad bit compelled to kick off this article by once again hammering on the meme that everyone newer to the hobby loves to repeat in that “all linears are basically the same”. While my aptly named last article from Drop titled ‘Not All Linears Are The Same!’ likely did a good enough job of dissuading most readers of that age old falsehood, this one may help put it to rest for the remaining few of you who weren’t so convinced. Don’t worry to all of you reading this who don’t care that much for linear switches, either, as the idea of ‘long pole’ switches can also apply to tactiles too! Once an odd design quirk developed to help emphasize sharp, forceful, and pointed bottoming out sensations in BSUN and Tecsee switches back in 2020, ‘long stem poles’ have since morphed into a...

Typing out all the Harry Potter books would be crazy, right? What would be the point? Seems like a weird flex even by keyboard enthusiast standards. Yep, that's right. Typing it out once makes no sense. That's why I'm going to type out the books a few million times! For the benefit of humanity and especially of you, fellow keymap wizards. This demonstration of the power of alternative/custom layouts is a shortened version of the original article at kbd.news. Given the huge extent of this topic, we can barely scratch the surface here so consider this write-up a mere teaser. Imagine you are an aspiring writer with a brilliant idea, just about to start typing out your magnum opus, staring at a yet empty document on your screen. Cursor blinking, annoying orphan relatives locked up in the cupboard under the stairs. Your story, about a young boy who ends up saving the world, is quite complete. You "just" have to type out heaps of your manuscripts and notes: about 6.5 million...

Figure 1: Not even all of these (mostly) KTT-made linears are the same! After all of my years of collecting, reviewing, and obsessing over switches, I can say with certainty that linear switches are the most misunderstood of all of the switch types. No, I’m not talking about mechanically either, as all of the claims of them “just going straight up and down” are somewhat kind of true. (Not too much though, don’t get that excited.) The part that is often misunderstood, though, is usually in what is being implied when people say that these switches just go straight up and down – “All linears might as well be the same.” If the title of this article didn’t make that obvious enough to you, I find that sort of idea to be completely and utterly wrong. The people who make these implications wouldn’t say that a Cherry MX Black is the same as a Novelkeys Cream switch? They also certainly wouldn’t ever claim that every Gateron-made linear is the same as every fancy TTC one out there...

“Anne Marie? Do the interns get Glocks?” asks Steve Zissou (Bill Murray) in Wes Anderson’s classic The Life Aquatic with Steve Zissou. “No” she replies without pausing from looking up from sunbathing… “they all share one.” If you’re new to director Wes Anderson and his collection of artsy, charming, and sometimes problematic but otherwise entertaining films, The Life Aquatic is a good place to start. Not because it’s his best work (The Royal Tenenbaums) or even his most approachable (The Fantastic Mr. Fox) … but because it is all of the things I described above and is a perfect example of what a Wes Anderson movie is. The actors, who make up his all-star casts are reduced (if that term can be used this way) into extensions of Anderson’s creative mind and play their parts to perfection. The plot is funny and also tragic, the music in the movie is completely unique and also instantly recognizable (Portuguese covers of David Bowie songs) and the movie blends dialogue and...

The SpaceFN concept - setting up your space key as a layer switch when held - is probably one of the most useful tweaks in the keyboard hobby. Let me explain how it works. My SpaceFN article on kbd.news made some rounds recently - quite surprisingly given the age of this concept. This piece you're reading is a condensed version of the full post. If you're left with unanswered questions, you'll most likely find the info you're looking for in the original write-up. On my imaginary top list of the most useful keyboard features, tweaks and hacks, SpaceFN would deserve a podium finish for sure. But what makes it so special? In short: SpaceFN is easy to implement, easy to learn, costs nothing, can be used with any keyboard, and can improve your productivity instantly. I will list its benefits below, but can state right at this point that the SpaceFN concept, setting up your space key as a layer switch when held, is clearly one of the most useful tweaks in the keyboard hobby....

This is a summary of how alternative layouts have been supported by kits such as Colevrak and Homing. It is not a discussion of alt layout performance and development, but if that interests you I highly recommend starting with Pascal Getreuer’s A guide to alt keyboard layouts (why, how, which one?). It’s a concise and comprehensive overview with links to some great sites that go deeper. He also has a separate Links about keyboards page. The Keyboard layouts doc he recommends explains layout goals and metrics in detail, summarizing the alt layouts discussed here as well as more than one hundred others. Sculpted-profile The majority of custom keycap sets are sculpted-profile (Cherry, SA, MT3, KAT, etc. - more on profiles generally here) so let’s start there. Because each row has a unique keycap shape, alt layouts require a unique keycap for each legend that moves off its QWERTY row. At first there were two The Dvorak layout was patented in 1936 by August Dvorak & William L....

Figure 1: Sometime around here is a good time to ask that question... If you’re new to the mechanical keyboard hobby, I have no doubt that planning your first keyboard build is a bit of a daunting task. To be entirely honest with you, it’s only a tiny bit less daunting for your second or even third keyboard builds should you stay around a little while longer. You’ve got the keyboard itself to worry about, stabilizers, keycaps, and even switches on top of all of the intangible marks you want your dream keyboard to hit. Switches are especially daunting right out of the gate as there’s just so many options out there to pick from – each with their own unique specifications, manufacturers, and more. Yet, in spite of all of these differences between switches, time and time again I find people always asking about lubing switches as one of their chief concerns when it comes to picking some up. With countless numbers of content creators talking about lubing switches, its no...

We’ve covered the basics of keycap profiles before—spherical/cylindrical, sculpted/uniform, etc. One thing that has come up more and more over the years as we’ve expanded our portfolio of offerings here at Drop is the distinction between some of our similar profiles. Specifically, what is the actual difference between DCX, DCD, and DCL?  Cylindrical Profiles To recap the previous article on the topic, one of the most basic ways to separate various keycap profiles is by shape (cylindrical, spherical, or flat). DCX, DCD, and DCL are all cylindrical profiles.  The most famous cylindrical profile is Cherry profile, as defined by the original manufacturer of the keycaps—Cherry. GMK now owns those tools, and as such, only they can technically claim to produce “Cherry” profile keycaps. Similar keycap profiles are often called Cherry profile colloquially, but are in actuality slightly different.  For the sake of not splitting hairs, all of the cylindrical profiles discussed here are...

One of the oldest questions, albeit one you don’t see very often anymore, is about 3-pin and 5-pin MX switches. Early in the custom switch scene, budding enthusiasts would need to determine whether their keyboard needs 3-pin or 5-pin switches. Today, the question doesn’t appear as often as it used to, but it is still important to know the difference and when one is a better choice.  The difference between these two types of switches is in the name, the number of pins. As seen in the pictures below, 3-pin switches have two metal legs for the contact leaves and registering of switch presses as well as the stem pole. These switches were traditionally called plate mount switches, as they relied on the plate to align the switches on the PCB. 5-pin switches have the same contact pins and stem pole but are also accompanied by two additional alignment pins on the left and right of the stem pole. These were called PCB mount switches, as they could be used without plates as the PCBs would...