Work around for firmware/configuration update error "command not recognized"
I spent more than an hour attempting to update my Drop Shift keyboard. I'm not sure what has changed, but I was not able to do it entirely from the Drop website as I had previously done. I have most of the keys configured how I would like, but the default LED function was a very bright, distracting, rainbow wave going across the keyboard. Every time I turned the computer on I had to manually adjust the lights how I liked. Using the online version or the locally installed app, you first have to install the QMK XAP interface. You then have to flash your already configured firmware file, which can be done on the Drop website. If you are logged in your last configuration is saved under your account and you can alter what you like, so you don't have to start from scratch. So, following the instructions I selected the appropriate board, entered bootloader mode, but when attempting to flash the file, I would get an error that the C:/Users/Mike C..... command is not recognized...
Oct 18, 2024
Chassis: InWin 303 Behind the hood: i5 3470k, AsRock Z77 Extreme 4, GTX 1080, 16gb Corsair Vengeance RAM, 128gb Samsung 840, 500gb Samsung 850 evo, Custom Sleeved PSU Cables with Corsair aomething something 650 PSU, Custom Waterloop, NZXT Hue+.
Monitor: Dell u3415w Speakers; JBL LSR305's (thank you Massdrop) Microphone: Samson C01u Pro Peripherals: Strafe RGB MX Silent, Razer Mamba 2012
I think that pretty much covers everything.