Oct 7, 201714493 views

Most fun knife to handle/play with?

I'm kicking this off by nominating my new Spyderco PM2. The pivot glides like a buttered swan, and the compression lock and oversized Spydey hole give me 4 different ways to open it. This is cocaine for my fingers.
What's yours?
search
thumb_up
Cristopher1976, wickid-good, and 97 others
thumb_up99
317
remove_red_eye14.4K
bookmark_borderSave


Pm2, honey badger, zt0393sw, or anthropos for me
The Olamic Busker and new Whippersnapper. Hands down. I think I have found 27 ways to deploy the whippersnapper. U can see a video if it on my IG @KnifeToolGadget. The CRKT Pilar is pretty awesome, too. The PM2 will always be my favorite. I have 4 of them LOL
Open my Kershaw Atmos with the flipper and KVT system !!!
I just bought myself the SOG Terminus XR just for the specific purpose of having a knife to have fun with and so far it does not disappoint. So far I've found 3 ways to open and close, axis lock, thumb studs and flipper tab. Great action and fun too!
Agree, I have the same one pictured, it's my EDC go to. Light and fun to fiddle with.
I been practising with a spyderco delica for a snappy flipout. I've also been practising with a front flipper, and a small one to boot. A twosun knife. I got both the twosun and the spyderco cheap - I wouldn't practise too much with knives I really like (unnecessary wear). The spyderco was 2nd hand with a messed up bevel, the twosun is nice, but the clip is very tight so only clips into light clothing. It was also cheap, so they are my play knives.
search

(Edited)
Now, do you want to have levels of fun with a knife as a play toy that will not only end up putting the pleasure of fidgeting with a well tuned compression lock knife to shame, but also gives you something completely outside the capabilities of the PM2 in any steel? One that ends up being fun at parties? Just hear me out on this: you want a trainer knife. And there's three ways you can go, fixed, folding, and Balisong. Fixed: BM SOCP Dagger Trainer
search
Just get it and start playing with it, you'll get what I'm talking about. You'll be doing spins in no time. The trainers go for $60 or so, the daggers for closer to a bill, but you buy the dagger in case you need it and then you build years of muscle memory screwing around with the trainer. Folding: the Fox 499T
search
Hours of fun, and that's before you start watching the videos Doug Marcaida did with this trainer. Flip it, flick it, wave it, thumb it, just run the spine along something with a raised edge. This is another one you'll spin by the ring just screwing around with. Balisong: The Boker Plus trainer:
search
It's way heavy compared to a light knife, on purpose. Makes flipping it about kinda like the kettlebell version of playing with a butterfly knife. But it's awesome fidgeting. If someone ever tells you 'quit looking at your phone' get this out instead and start doing flips and spins with it. Anyway since you can go full speed full strength with a trainer when you want to, it ends up being a lot more therapeutic, like power fidgeting. It doesn't have that same thrill of 'omg I could cut the living bejesus out of myself' but I have learned that one can live without that thrill for extended periods of time. So it is an option to take.
(Edited)
reswright
Wasn't quite sure what to make of a knife that doesn't cut, but I suppose if one of these saves you a trip to the hospital, it'll have paid for itself and then some.
Daisy_Cutter
Well, your friends eventually get sick of getting ambushed with a practice knife too, but it's fun for a long time before that.
I absolutely love my Spyderco Sliverax. With the traditional Spidey hole, plus flipper tab there are so many ways to fidget with it. I also love my new Ontario Rat 2 in D2. It feels like it's assisted...very fun to flick.
Buggout hands down. I can fidget flip that thing all day long. Waiting on the next drop of the protech mordax, I’m guessing it will be giving the buggout a run for its money
Benchmade 940 hands down!
Really liking my Spyderco Paysan super smooth, S90v Integeral, Rasentai design....
DCG BBN-M
Sorry , last but not the least is the griptilian ! I have to many knives .... ( not really)
Also forgot the spyderco Caribbean, it not as smooth as most compression locks but man it middle flicks lick a beast!
Hands down , the new spyderco smock , then the pm2 and the benchmade 940 and some of the new Ganzo knives as well as the Kizer sheepdog , and if you have the $$$ the benchmade infidel or any quality otf d/a knife, I would add honorable mention of a quality balisong trainer, as the real ones can really do some damage unless trained well . Also most ZT knives are smooth as long as they are not assisted .
My favorite right now is the Millit Torrent. Smooth, fast action. I can open it four different ways. It's definitely my go to fidget knife. My second is the Hinderer XM18 3" and finally my modded Para3!
I've just recently picked up a s110v Manix 2...but nothing beats a Sage 5 imho. I'm awaiting sprint runs improving the already spectacular s30v and CF over laid G10.
I like both compression locks and axis locks. Super easy to just flick open. but what I really like about them with a well tuned knife is how you can noiselessly roll out the slow flick like the blade's in zero G. And ease it back shut with a reverse of the same motion. So quiet that if you weren't watching you wouldn't know. Do it just right, and you won't hear the click -- you'll only feel it. Some folks find this unsettling. Others know it speaks to a level of control that surpasses the average.
Anything with an axis lock. Something about the flicks.
I got a PM2 a few weeks ago. (S35VN) It really has great ergos. The compression lock is terrific, but does not fall shut as easily as some. The Bestech Swordfish has awesome ergos. My Griptilian is certainly in the running here. This is really a tough call. I think my answer changes from time to time.
The same. Literally. Lol
Spyderco Smock !
Tman72
Amen
The Kershaw Bareknuckle. It may not be as buttery smooth as some more expensive knives, but the snap it makes when it fires is world class.
Just got the Buc. Have to say it has been the most fun to play with. Opens so smooth and makes that “snikt” sound when it locks. Very satisfying!
I've always loved playing with my bali's or OTFs ... but as for a knife that wouldn't attract undue attention, I would have to say my Gerber Applegate-Fairbaun (sp?) F.A.S.T. Assist. I've had it for about 15 years now and can't wait to pull the trigger on an auto version. My single biggest gripe with Gerber has always been the shallow serrations ... but now I almost exclusively buy straight edge knives. I agree though - my second favorite would probably have to be a PM2. Currently waiting on brass scales for one of my PM2s now. CAN. NOT. WAIT.
Kilsimiv
Brass scales??
At the moment I canT stop fidgeting with my Direware H90 & S96 models. They lock up so fast and hard that there is a felt "recoil" on lockup. LOL The sound of the lockup is a big part of the obsession as well. KA-CHINK!
At the current time, my two favorite fidget-factor knives are the Panchenko Bean and the Spyderco Smock <--- love the button/compression lock!
While I love the ZT804CF, my preferred EDC, I'm actually going to nominate the FF Falcon Wing as the most fun to play with. It has an amazing snap as it opens, and feels great in the hand.
Spyderco Manix Sprint Run
search

(Edited)
Suingab scales makes my PM2 as ergonomic as the shaman, without having to wait forever for the sprint runs.
search

Load 2 more comments
Jmolzan80
Nice!! Where did you buy the scales..if you don’t mind my asking..😉
Bohunk
g10.lt