Click to view our Accessibility Statement or contact us with accessibility-related questions
Showing 1 of 18 conversations about:
EntropyCollector
84
Feb 11, 2020
bookmark_border
Some thoughts:
a) Detachable RCA cable is a must. Same for the ground cable, just leave the RCA connectors / a screw there and let people use whatever cables of whatever length they want. Using built-in cables may be cheaper but it's not worth it, you don't want users to have to manually replace damaged cables with a soldering iron.
b) Built-in phono stages are practical but in most cases they are cheap and hurt sound quality, also many people would likely want to use their own, if you decide to put one, make sure it's a decent one and allow for it to be completely bypassed. A nice plus would be to also allow switching between MM and MC, since the pre-amp circuitry is a bit different depending on the cartridge + maybe add a headphone jack as well.
c) 78RPM support would be a nice plus for some people.
d) You'll probably go for a switching supply, make sure it's a decent one with proper noise filtering, especially in case you add a built-in phono stage.
e) Rubber feet suck, go for something better instead (e.g. noise damping cones/spikes w pad), it makes a difference if you don't have a proper stand and the upgrade is a relatively cheap one. They also look much cooler :-)
f) Throw in there a replacement belt just in case.
In general I'd always go for build quality instead of added features, if you can't get the raw sound from the LP without compromises any other stuff such as built-in amp stages, ADCs with usb ports, auto-stop / auto-park, 45/78RPM support don't make much sense. I have an old Thorens turntable, its build quality is phenomenal, from its suspension system to the motor to the spindle. It doesn't need any extras, it's only weak point were the built-in RCA cables that used to be common back then. There are so many turntables out there with "cool features" that can't even play decent stereo (not to mention some of them even damage LPs), on the other hand there are so many over-priced turntables for no reason, targeting "audiophiles" who don't know what they are paying for as long as it's featured on some blog/magazine. Start from a solid turntable and then add the extras, to me a turntable with a good motor, tonearm, plinth and power supply, a decent built-in phono stage, that can properly support MC cartridges, below 400$ would be a good product. Especialy if I could buy it in EU at this price.
(Edited)
Trending Posts in Audiophile
Simthaniel
Rigs
Modded headphones with qudelix at the core
When I received the Qudelix 5K, I had already modified a pair of Superlux HD-681 headphones. I previously soldered my own balanced connections to the drivers, providing multiple ways to connect and...
Apr 14, 2024
brothamike
A decent set of IEMs
I am in the midst of a 300 hour burn-in but, I will say I am enjoying how this set sounds so far. Before I received these which was btw late by a few weeks, I purchased a Sony/Kimber Kable MMCX...
Apr 12, 2024
merrick97
Should I exchange the PC38X for better headphones?
I bought the PC38X headphones FOR GAMING and they are great, but I have NO use for a Microphone since I don't do competitive gaming and I was wondering if there were better headphone options at a similar price without a headphone, where (presumably) more of the cost was put into making it sound better. I also find that my PC38X don't get quite as loud as I would like and I was wondering if a cheap amp like the iFi Go link would draw a little more volume out of my phones. https://www.amazon.com/dp/B0BN6MM822?psc=1&ref=ppx_yo2ov_dt_b_product_details I went with the PC38X since it was considered the best bang for buck headphones. I care most about using spatial apps like DOlby Atmos and DTS Headphone:X. Suggestions are welcome.
Apr 11, 2024
LostnAmerica
Sound Signature of the Grell Project.
Wondering what type of sound signature the Drop Grell project headphones will have or trying to attain. Any update would be appreciated.
Apr 8, 2024
Fabulous
Looking for a gaming/content audio setup
Hello! I'm looking for recommendations on audio setups. I'd be planning on using it mostly for gaming. Preferably I'd like a pair of large closed back headphones since I have a big head and jaw. I'd also like to hear myself through my mic with mic monitoring. As far as budget goes, I don't really have one. But under 600$ would be nice. I can go higher if needed. The audio setup would be connected to a high performance PC. Thank you in advance for any recommendations!
Apr 4, 2024
1plsd
$10 Drop Coupon Email not sent?
Trying to buy some gear off Drop for the first time. I was told I would receive an email with a welcome to drop $10 off promo. I never received that email. Drop was able to send me emails for my login token and email for Password update. But for some reason the $10 off coupon was never sent to me.
Mar 31, 2024
NMPacella
New here
Hello, I just joined, primarily for the audiophile products. Looking at purchasing the NHT C3 speakers for our new living room. Space is about 15 feet wide by 33 long and they will fire long ways. Space is just for general listening, music room with all equipment is downstairs, so hoping they will fill it with sound nicely. Cheers.
Mar 18, 2024
Drop Refurbished
Like-new products you can trustDrop Rewards
Get $5 for every 500 points you earn! Learn more
Drop Keyboard Club
Become a member and expand your keycap collectionCollaborate With Us
For Brands & DesignersFollow Drop