*Help* Screw in stabilizers not fitting in Dropshift V2 keyboard
I'm trying to build a mechanical keyboard with screw in stabilizers, I've build some mechanical keyboards with click-in stabilizers, never with screw in. Somehow one of the pins of the metal top-part collides with the screw in stabilizer of the numpad "enter key". I already tried grinding of a bit of the pin that collides with the stabilizer, but unfortunately I can't make it fit/close properly. You can see that the pin of the toppart leaves a mark on the bottompart of the stabilizer, see picture 2. What am I missing? Using Durock V2 in a Dropshift fullsize V2. See pictures below, thanks in advance!
Apr 23, 2024
- I have to unplug it, wait for 10-20mins, plugged it in and it works as per normal but freezes again after awhile.
Tried flashing the keyboard through the configurator and downloading the latest relevant files via (https://github.com/Massdrop/mdloader/releases) ,but unfortunately it doesn't work. (The keyboard could not be detected through the 60 seconds and hitting Alt+B or the reset button at the back of the board just shuts the keyboard down and doesn't turn itself on) The build of the keyboard is great, and i don't mind going through a replacement. But it will be an issue for me if the mentioned issue happens on the new replaced keyboard due to the waiting duration. Will be great if anyone can chime in pertaining to my situation. Thanks.