Susuwatari Wood

Recently, I flashed my SHIFT v1 with the configurator app. Chose XAP and the appropriate keyboard (SHIFT v1) and did some LED config with the online configurator and then flashed the board all with that. Everything works, LEDs are as expected, keyboard input works... Except when the PC (Win 10) goes to sleep and then comes back. Keyboard will have LEDs on, It even wakes the PC up when I press a key (so there is some input being sent) but, once the PC wakes back up, the keyboard will not send input unless I unplug/plug it back in. This was never an issue on stock firmware for 4 years now so it has to be the new firmware is my guess. Anyone have suggestions or input on something I may have done wrong or maybe this is a known issue they have not addressed with the v1 (or others?) Trying to get the "Original" Firmware to reflash back to stock results in this (just hangs on compile and download) Thank you for any... input ... on the matter 😅

That would be a cool shop to go to in a mall. In some of my past posts and reviews I’ve written there have been requests to walk through my own process for building a keyboard for myself. I’m fortunate in that I get to build many keyboards. I haven’t logged every single keyboard that I’ve built, that would have been great, but hindsight is 20/20. The vast majority of the builds that I do are for other hobbyists. I built a small name for myself doing commissions and build services specializing in leveraging my extensive knowledge of the hobby to help acquire unique boards, make recommendations in build materials, and providing a truly personalized board for those who might not have known much about mechanical keyboards before reaching out to me. I started doing this service back in 2018, and now, being a dad, husband and full time IT specialist, I tend to only accept a couple commissions at a time. I’ve got my own backlog of boards, my collection seems to continually grow, and I...