Audioengine A2+ Bluetooth Speakers With DAC
Connect Your Way for Crystal-Clear Audio
Engineered to accommodate any listening setup, the A2+ speakers from Audioengine feature an unprecedented amount of input flexibility—plus an integrated DAC—for high-quality sound, no matter how you connect. Listen wirelessly through Bluetooth and enjoy pristine, distortion-free sound thanks to the aptX codec and a high-performing DAC that’s likely superior to your phone or computer’s audio card. You can also connect through USB to take advantage of the DAC through a wired connection. For direct audio, dual RCA analog audio inputs allow you to hook up record players, aux cords, CD players, and even TVs with an analog output. Connect a subwoofer for extra bass thump, and enjoy detailed audio from the A2+’s custom aramid fiber woofers, silk tweeters, and hand-finished wood cabinets.
Color
Black
Red
White
Specs
- Audioengine
- Amplifier type: Dual Class-AB, monolithic
- Power output: 60 W peak power total (15 W RMS / 30 W peak per channel), AES
- Woofer: 2.75 in (7 cm) aramid fiber woofer with advanced voice coils
- Tweeter: 0.75 in (1.9 cm) silk dome tweeter with neodymium magnets
- Inputs: 3.5 mm stereo mini-jack, RCA, USB, Bluetooth
- Outputs: RCA variable line-out
- Internal D/A converter: CSR8670
- Input bit depth: Up to 16 bits native
- Input sample rate: Up to 48KHz native
- Mains voltages: 100 V – 240 V, 50 / 60 Hz auto-switching
- SNR: >95 dB (typical A-weighted)
- THD+N: <0.05% at all power settings
- Crosstalk: <50 dB
- Frequency response: 65 Hz – 22 kHz (± 2 dB)
- Input impedance: 10 kohms, unbalanced
- Protection: Output current limiting, thermal over-temperature, power on/off transient protection
- USB connector type: Micro USB
- USB device class: Type 1.1 and above
- Dimensions (per speaker): 6 x 4 x 5.25 in (15.2 x 10.2 x 13.3 cm)
- Weight (left speaker): 3.55 lbs (1.6 kg)
- Weight (right speaker): 3.15 lbs (1.4 kg)
Bluetooth
- Internal Bluetooth receiver: CSR8670
- Input bit depth: 16 bits
- Bluetooth version: Bluetooth 5.0
- Bluetooth codecs supported: aptX, AAC, SBC
- Wireless operation range: Up to 100ft (30 m)
- Wireless latency: Approximately 30 milliseconds (ms)
Environmental Requirements
- Operating temperature: 32°F – 95°F (0°C – 35°C)
- Non-operating temperature: -4°F – 113°F (-20°C – 45°C)
- Relative humidity: 5% – 95%, non-condensing
Included
- 6.6 ft (2 m) speaker wire
- Power supply and cord
- USB cable
- 4.9 ft (1.5 m) mini-jack audio cable
- Microfiber speaker bags and cable bags
- Brochure
- Setup guide
Shipping
Estimated ship date is Dec 4, 2024 PT.
Payment will be collected at checkout. Cancellations are accepted up to 2 hours after checkout, after which all sales final.
