CLICKEYbits Fidgety Switch Testers Reviews | Drop

Free Standard Shipping in the US on orders over $99

CLICKEYbits Fidgety Switch Testers

Mech Keys

Showing 1 of 38 reviews about:

CLICKEYbits Fidgety Switch Testers

GODXZILLA

Dec 7, 2019

Verified Buyer

So close to perfect...but still good

The good stuff: - Simple, solid and unique - Take my favorite mechanical switches wherever I want - Annoy my significant other, friends and strangers while feeling sublime The bad: - Switches are glued to a 3D printed foundation located in the center, preventing freedom to customize switches - A little pricey for the lack of ability to switch out switches unless tampered with I have left a review on the 'Tall' version of Clickeybits fidget tester, which has the SA profile keycaps and only comes in the clicky/green switch version. Other than that, they are the same, and it will come down to what switches you prefer. Check out the 'Tall' version for a more extensive review that is the same with the way I feel with these testers. Now to keep this relatively short, I wish the switches weren't glued to the center. I'm more of a clicky kind of guy, so I wanted to switch out the cherry red and black switches for Kailh box navy and jade (if you're like me and you like them super THICC clicks, go for the super clicky version, you won't regret it ;3) for my clear white tester. But thanks to the switches being glued, it required force and some finesse. Very difficult to pop each off without destroying the integrity of the tester. If you decide to do the same as me because you have mechanical switches you love that Clickybits does not have available, you've been warned. You may either break the current switch you're pulling out or end up chipping/cracking the internal 3D printed foundation in the center (check out the pics). I've succeeded in replacing both. I also didn't glue it like it originally was since there were no issues with the switches falling out or rattling. Now this is where I stop. More details in the 'Tall' version review since its the same problem. But that's my biggest gripe. Can't customize unless you mess with it. Other than that, when you have the switches you want in the tester, it is so addicting (I cannot keep myself from fidgeting with it!). Very hard to stop, especially if you're mechanical switch enthusiasts that drool from the sound and feel of the combination of keycap and switch being pressed. (Lol, I hope I'm not the only one that feels that way... :s) Not to mention the fact that you can take it with you anywhere! Now if Clickybits stops gluing switches to the center in their future drops, which I'll most likely purchase again, I'll change this review to five stars, in a blink of an eye~~ Another warning, if you go for the super clicky version and fidget with it with people around, many of them will end up hating you, both strangers and loved ones alike! Sadly, the discrimination against THICC clicks is real :c

Recommends this product? Yes

Was this helpful?

Gav27

Apr 13, 2020

GODXZILLA"Now to keep this relatively short". *proceeds to type an essay*🤣 Great review tho, thanks for the insight! Hoping for a non-glued version and I'm definitely copping!

justn0rth0fn0rmal

Apr 18, 2020

GODXZILLAGood, thorough review. I would like to do what you did. Any recommendations on what to do to remove these stock switches while retaining integrity of the clickeybits housing?

GODXZILLA

Apr 20, 2020

justn0rth0fn0rmalThanks, really appreciate it :3! And I used just a normal switch remover and brute force to remove these. But honestly, I don't think there's another way to remove the switches safely without potentially breaking the base, other than maybe getting a blow-dryer and hopefully have the heat loosen the adhesive? Problem with that still is that the adhesive used I think is super glue, since it looked flaky and dried, and may end up damaging the shell if you do use a blow-dryer. Lastly, some switches weren't glued as much, hence popped off with no problem. Those that were, I could definitely feel it, and has led to a chipped section of the base... Hopefully this helps!

CaptainNomae

Mar 7, 2021

justn0rth0fn0rmalIf you're willing to break the switches then probably pulling them out. Maybe something that would dissolve the glue would also work although I don't know if that would also dissolve the 3d printed part or even the outer housing.

Vote

See More Reviews

PRODUCTS YOU MAY LIKE

Drop + MiTo GMK Laser Custom Keycap Set

$49

Drop + Matt3o MT3 Susuwatari Custom Keycap Set

$89

Drop + biip MT3 Extended 2048 Custom Keycap Set

$35

Drop Holy Panda X Mechanical Switches

$19

Drop Skylight Series Keycap Set

$19

Drop + Oblotzky SA Oblivion V2 Custom Keycap Set

$20

Drop + RedSuns GMK Red Samurai Keycap Set

$69

Drop GMK White-on-Black Custom Keycap Set

$89

Drop + The Lord of the Rings™ MT3 Elvish Keycap Set

$79

Drop + MiTo SA Godspeed Custom Keycap Set

$39

Trending Posts in Mechanical Keyboards

RealRage_TV

software?

Hi I'm new to Drop and i just received my Keyboard i have been waiting for months for by Drop x MTN Dew x Borderlands movie and didn't know if there was a software like Logitech's for the keyboards. if anyone could help please let me know

Nov 20, 2024

Mech Keys

Questions

Vote