Mondaine Railways Tube Desk Clock Reviews | Drop

Feb 15, 2019

Verified Buyer

A great iconic piece of Swiss railway on your desk. I put a small piece of tape on the inside of the stainless steel tube, so the 6 o'clock lines up.

Was this helpful?

Jun 14, 2019

ChronoLoverhow do you change the battery?

Jun 14, 2019

Vote

Jun 17, 2019

LWNYCYou just need to pry off the case back, and the movement should be exposed. I'll upload an image once I get it opened.

Jun 17, 2019

Jun 18, 2019

ChronoLoverThanks. A photo would be super.

Jun 18, 2019

Vote

Jun 22, 2019

LWNYCAfter using a plastic stick, which I usually use a small plastic pen, to push the clock out of the metal base, use a watch knife to pry the case back off. If you are not familiar with a watch knife, it's something like this: http://www.amzn.com/B0001CULSS. You can use anything thin and sharp to pry it off, not just a watch knife. The watch clock uses 1x 371 (SR920SW) battery.

(Edited)

Jun 22, 2019

Jun 22, 2019

ChronoLoverTHANKS. Nice mechanical watch tools! Do you use winders for your automatics?

Jun 22, 2019

Jun 22, 2019

LWNYCI am in the camp that don't like using watch winder. I personally think that watch winder may wear out the movement too quickly. I don't mind set date/time when I wear my automatics. I guess it may be worth it for perpetual calendar watch.

Jun 22, 2019

Jun 23, 2019

ChronoLoverI agree with you on the winder but an unwound automatic can be costly at the service shops. With my favorites, I put the winders on a timer to only turn, say 8 hours a day to mimic actual wearing. Over the years, I found that the Swiss movements tend to like this very much; including ETA to house brands from Vacheron, etc. Japanese movements like Seiko should not be left on a winder. Not sure why this is.

Jun 23, 2019

Jun 24, 2019

LWNYCThat's very interesting. I have not had any experience with Swiss automatics. I've primarily had experience with automatic movements from Seiko, Orient and Miyota. I suppose it's not too surprising to find different designs and types of lubrication between the Swiss and the Japanese.

Jun 24, 2019

Jun 24, 2019

ChronoLoverFor the Seikos I wore, I liked the 17 Alpinist the most. Never went into the Grand Seikos as the Sarb had most of their charms, 95%+ of the accuracy if you wear it all day and place it facing down overnight. After half a year on a Japanese winder, the Alpinist gradually lost more and more seconds until I realize what was happening.

Jun 24, 2019

Jun 24, 2019

LWNYCThat's very concerning. I have a thing for GS watches. They are also designed differently than the SARB, so it may make a difference.

Jun 24, 2019

Aug 12, 2019

ChronoLoverI tried prying the back, broke my nails. ouch! Any tools I should use? Thanks!

Aug 12, 2019

Vote

Aug 13, 2019

LWNYCYeah, nails will not work for that case back. You have to use a watch knife to pry the case back off. If you are not familiar with a watch knife, it's something like this: http://www.amzn.com/B0001CULSS. Otherwise, You can use anything thin and sharp to pry it off, like a pocket knife. Use cloth or something in between the knife and the case, to prevent from being scratched. I personally don't really care for minor scratches on the back, where you can't really see it regularly anyway. Also, if I remember correctly, that case back needs quite a bit of force to be put back as well. So, you will also need a watch press, like this one: https://www.amazon.com/dp/B073PW85HS.

Aug 13, 2019

Vote

Aug 13, 2019

ChronoLoverwow. that second piece is like primeval. Thanks mate!

Aug 13, 2019

Vote