Sitemap | Drop

Free Standard Shipping in the US on orders over $99

Mechanical Keyboards Threads

Are the legends white or very light gray? I preordered either way, but just curious lol.

Are the letters & symbols on the keycaps transparent?

Are the lighter-colored Alpha keys actually "white"-white, or beige? Hard to tell based on some photos. I know folks have asked about the specific PBT color codes which would also be great to know.

are the linears just the WS silent linears?

Are the Lord of the Rings keycaps compatible with the WS Morandi switches.

Are the magnetic adapters stems that go in non metal key caps to allow them to work with this case?

Are the magnetic feet made using Neodymium? And if so is there a potential for harming nearby electronics?

are the mechanical keys hot swappable?

Are the middle 9 keys hot swappable for custom key caps?

Are the modifier keys in the Beige sets Gray? I'd like to pick up the Windows Kit but only if it matches the other modifiers.

Are the modifiers on this set the same color keys and legends as the GMK red samurai set?

Are the MX silvers the same as speed silvers?

Are the new keycaps all fixed now ? I don't wanna buy one if it won't fit my kailh box switches

Are the NOVELKEYS X KAILH LINEAR CREAM SWITCH compatible with my Drop Shift?

are the novelties ever coming back in stock?

are the NOVELTIES out of stock?

Are the old cases be compatible with this?

are the ortholinear kits not available this run? thx

Are the other colors going to be restocked before this closes?

Are the pegaso base coming back in stock?

Are the per-key LEDs also on the bottom side of the board? this is what it looks like to me in the pictures!

Are the Permafrost keycaps gray or a shade of blue? Photos seem to vary

Are the pictured palm rest/mat just a render or are they real somewhere?

Are the planck / preonic spacebars (1u / 2u) convex?

are the problem with them being too tight still happening or have it been fixed with this patch? I really do not want to have to clean them and relube it.

Are the profiles saved to the keyboard, or do I need to install the software on any PC I'd want to have changes to the layout?

Are the purple elf switches rgb compatible

Are the R5 keycaps going to be “flat” like in the /dev/tty set, or will they have the same sculpt as the R4’s like in the other MT3 drops?

Are the red Samurai available for QWERTZ?

Are the RGB arrays configurable?

Are the rotary encoders incremental or absolute?

Are the rows 1-1-2-3-4-4?

Are the rows on the ortho picture accurate? Is there no way to set up r5 with symmetrical ctrl alt win?

are the SA caps the same size as a regular SA keycap?

Are the SA Laser 65 Kit keycaps shine throughs?

Are the screens IPS or OLED?

Are the shortcuts posted somewhere online? I lost the little slip and I cant find info online. (Mdia shortcuts and LED change shortcuts)

Are the side-mounted rockets detachable?

Are the sold-out colors restocking anytime soon?

Are the space bar kits discontinued?

Are the space bar kits for sale, they're pictured, but there's no way to order them.

Are the space bars in the Extras and Space 1&2 kits all convex? Also what are the sizes?

Are the Spacebar sizes different for all 3 sets.

are the spacebars (3u and under) concave or convex?

Are the spacebars (both 1u and 2u) that come with the ortho set convex or concave? I have the dev/tty and 2048 sets and they both have convex space bars which are easy on the thumbs. The photos for this set look concave, however.

Are the stabilisers included?

Are the stabilisers screw in or plate mounted? Does the keyboard include case & plate foam? What kind of mounting style does it use? Does the hot swap PCB support up to 5 pins?

Are the stabilises screw in or mounted in

Are the stabilizer pcb or plate mounted?

are the stabilizer screw in or clip in

Are the stabilizers in the kit? I cannot see them on photos.

Are the stabilizers included?

Are the stabilizers pcb screw in or plate snap in?

Are the stabilizers plate mounted ?

are the stabilizers pre-lubed?

are the stabilizers pre-lubed as well?

Are the stabilizers screw in?

Are the stabilizers screw-ins?

Are screw-in stabilizers supported by the V2 PCB?

Are the stabs any good

Are the stabs screw in or plate mounted

Are the stabs this keyboard use plate mounted or pcb mounted?

Are the stars in the ball or just on the surface?

are the switch mounts 3 or 5 pin?

Are the switched removeable?

Are the switches 3 pin or 5 pin? What kind of stabs are needed?

are the switches 5 pin or 3 pin?

Are the switches able to hot-swap or soldered to the board?

Are the switches already lubed?

Are the switches already lubes and is there any condensing within the keyboard

Are the switches and stabilizers lubed? Are the stabs pre-modded?

Are the switches and stabs pre lubed?

Are the switches compatible with Drop's Alt Keyboard?

Are the switches electrically functional, if we were to put them into a hot-swappable board for testing the feel and activation depth?

Are the switches factory lubed?

Are the switches factory lubed or would I have to do that myself?

Are the switches hot-swap? I'm assuming so, since it's labeled "switches included" If so, 5-pin or 3-pin?

are the switches hot swappable?

Are the switches hot-swappable or are they soldered to the board?

Are the switches hotswappable?

Are the switches in the prebuilt shift V2 lubed? I am interested in the Holy panda x clears!

Are the switches linear, tactile or clicky?

are the switches lubed?

Are the switches north or south facing?

Are the switches optical?

are the switches pre lube?

Are the switches pre lubed?

Are the switches prelubed

Are the switches soldered in or hotswap?

Are the switches soldered on to the pcb?

Are the switches/stabs pre lubed or factory lubed?

Are the switches swappable?

are the top housings of these nylon or pc (polycarbonate)?

Are the trues good for gaming?

Are the USA prices what you pay for in uk or does it convert to how much it is in the uk

Are the USB-C ports passthrough? For example using an external numpad

Are the wheels rotary encoders with detents? I have the triple knob macro pad and dislike the detents on the knobs, would greatly prefer either being able to turn them off (one can dream, right?) or just not having them.

Are the white and beige colors the same as previous runs?

Are the white keycaps available?

Are the white keys in these sets the same white as the MT3 black on the white set? Color only not font that is.

28 29 30 31 32 33 34 35 36 37 38 39 40 41

Company

About Drop Studio Student Discount Privacy Policy Terms of Use Cookie Settings

Drop Refurbished

Like-new products you can trust

Drop Rewards

Get $5 for every 500 points you earn! Learn more

Drop Keyboard Club

Become a member and expand your keycap collection

Collaborate With Us

Become an Affiliate For Brands & Designers

Support

Contact Community Guidelines Help Center Sitemap

Follow Drop