Photos

I spent more than an hour attempting to update my Drop Shift keyboard. I'm not sure what has changed, but I was not able to do it entirely from the Drop website as I had previously done. I have most of the keys configured how I would like, but the default LED function was a very bright, distracting, rainbow wave going across the keyboard. Every time I turned the computer on I had to manually adjust the lights how I liked. Using the online version or the locally installed app, you first have to install the QMK XAP interface. You then have to flash your already configured firmware file, which can be done on the Drop website. If you are logged in your last configuration is saved under your account and you can alter what you like, so you don't have to start from scratch. So, following the instructions I selected the appropriate board, entered bootloader mode, but when attempting to flash the file, I would get an error that the C:/Users/Mike C..... command is not recognized...

Assembly Steps: 1. Remove the 8 case screws with a phillips head screwdriver. (Note: If your keyboard already comes with stabilizers already pre-installed and you do not want to change your switch plate, you can safely skip to step 7.) 2. Remove the structural top case once all the case screws are removed. 3. Take out the keyboard plate and PCBA assembly together and flip them around. Remove the 6 screws connecting the assembly with a phillips head screwdriver. 4. The plate and PCBA assembly should now be separate, allowing you to add the PCBA stabilizers. You will need to make (4) 2u and (1) 6.25u stabilizers for the CSTM80. Please see image below on how to create stabilizer assemblies. (Note: Test the stabilizers and make sure the stems are freely moving up and down to ensure everything is installed correctly.) 5. Ensure IXPE foam is affixed properly on the PCBA with all holes aligned. Install the stabilizer assemblies onto...

You know the story. 3 rings to the Elven-kings. 7 to the Dwarf-lords. 9 to mortal men. And 1 to the Dark Lord. What will your fate be? Spin the Wheel of Power to see where you land on the ring of prizes. Regardless of the outcome, be sure to take a look at the Lord of the Rings collection after claiming your prize. You can spin the wheel a maximum of three times, but much like those who have worn the Ring of Power—there's no turning back after that button is clicked. How did the journey go for you? Share your spoils below.

I spent more than an hour attempting to update my Drop Shift keyboard. I'm not sure what has changed, but I was not able to do it entirely from the Drop website as I had previously done. I have most of the keys configured how I would like, but the default LED function was a very bright, distracting, rainbow wave going across the keyboard. Every time I turned the computer on I had to manually adjust the lights how I liked. Using the online version or the locally installed app, you first have to install the QMK XAP interface. You then have to flash your already configured firmware file, which can be done on the Drop website. If you are logged in your last configuration is saved under your account and you can alter what you like, so you don't have to start from scratch. So, following the instructions I selected the appropriate board, entered bootloader mode, but when attempting to flash the file, I would get an error that the C:/Users/Mike C..... command is not recognized...