mStone Acrylic Mechanical Switch Lube Station
$30
01 / 17
mStone Acrylic Mechanical Switch Lube Station
bookmark_border
$30
1.8k Sold
·
Ready to Ship
Here's what our community has to say
All of our reviews are from verified customers.
2.8
134
check
36%
would recommend to a friend
search
close
Sort by: Newest
keyboard_arrow_down
Goalkeepuh
0
Apr 16, 2022
Good but better options
This is good but their are much better options for cheaper
close
Would not recommend to a friend.
Miggz
1
Apr 12, 2022
Looks good and does the job
There’s definitely better ones that you can get but if you’re just looking for something cheaper that does the job, this ones it
check
Would recommend to a friend.
SalemxStrange
0
Keyboard Club Member
Mar 18, 2022
Switch Holder
The protective paper film is a lot of hassle to remove and the stem slots are pretty much not usable, but it does hold the switches alright. Not a great product overall.
Camii
1
Mar 15, 2022
Horrendous!
When I opened the box, I wasn’t impressed, it’s just a slab of thick acrylic with laser cutouts, you can tell it’s been done quick and cheap, the edges of the slab are warp and not even sanded down. The protective paper stuck to it was a nightmare to remove.
I tried loobing Gateron yellows and the switches don’t even fit? Also the gap between the switch holes and the stem holes are so small that you can actually have switches and stems on the station at the same time. Absolute waste of money, I’m very disappointed…
close
Would not recommend to a friend.
Ebromund
17
Feb 14, 2022
Not the best option
The stem cutouts were pretty unfinished, so stems wouldn't fit. I had to clean up the cuts for it to be actually useful. There are better options out there.
close
Would not recommend to a friend.
ninjah
18
Feb 6, 2022
too big for me
the station works but i was new to lubing when i got this. i learned that it takes forever to lube a large batch of switches and now i do them in groups of 10 to 20 depending on how much time i want to spend on them. it's also hard to get in there to lube with the board full of open switches. i recommend getting a smaller one from my experience.
close
Would not recommend to a friend.
(Edited)
HeroBum
3
Jan 31, 2022
Switch housing cutouts are too small
Putting a bottom switch housing fully into the cutouts squeezes the switch housing. I can see the plastic on some of my houses bending inwards to fit into the cutouts. Removing them afterwards also takes quite a bit of work. I also noticed that not all of them are the same size, as some are harder to press in, and subsequently harder to remove than others.
The only way I've been able to safely put my bottom switch housings on this, is to not even press the housings into the cutouts, but just lightly put the housings where the cutouts are, but this is in no way stable. If I try lubing the housings in this way, the switch housings easily shift and move around, to the point where I'll need to hold down the housing with another tool being used from my left hand.
At this price point, this is just unacceptable quality, and definitely WOULD NOT recommend buying or using at all. There are much better options, at cheaper prices (albeit, probably smaller in size), or even slightly more expensive, but extremely better quality.
close
Would not recommend to a friend.
Mk14
3
Jan 23, 2022
stem cutouts are too small
Most of the holes were a bit tight but only a real problem with the stems.
ebassan
0
Dec 26, 2021
Very convenient
Love this lube station. My favorite part about it is that it won’t get your hands sticky.
check
Would recommend to a friend.
Tonka
17
Dec 20, 2021
No issues from me
Saved me a bunch of time with switches. A very helpful tool for keyboard fans
Showing 10 of 141
Recent Activity
