FiiO K5 Headphone Amp and Dock
Convenient DAP Docking
With three different gain settings to power a variety of headphones and a docking base compatible with the X-series line of FiiO digital audio players, the K5 is one of the most versatile headphone amps in its category. Utilizing TI’s TPA6120A2 current feedback headphone driver, it’s able to lower its output impedience to a transparent ＜1 ohm and increase its output power up to 1.5 watts at 32 ohms. On the back, you’ll find a balanced line output, RCA input, a secondary dock input, and a USB port. For a more extensive review, read more here.
Note: This drop is limited to 27 units.
Specs
- Gain: 0 dB (low), 6 dB (mid), 12 dB (high)
- Headphone port: ¼ in (6.35 mm) stereo jack
- Headphone impedance: 16~300 ohm
- Volume control: Via analog potentiometer (incl. power switch)
- Power: DC 15V/1.5A
- Docking compatibility: X1II, X1, X3II, X5II, X5III, and E17K
- Dimensions: 4.7 x 5.11 x 2.1 in (12 x 13 x 5.5 cm)
- Weight: 15 oz (450 g)
- Partial Performance Parameters for Headphone Output
- Output power 1: >1.7 W（16 ohm/THD+N＜1%)
- Output power 2: >1.5 W（32 ohm/THD+N＜1%)
- Output power 3: >150 mW（300 ohm/THD+N＜1%)
- Output impedance: ＜1 ohm
- Crosstalk: ＞70 dB (1 kHz)
- THD+N: ＜0.002% (1 kHz 32 ohm)
- SNR: ≥110dB (A-weight) [AUX IN]
- Frequency response: 10 Hz~90 kHz（-3 dB, input: 700 mV）
- Maximum output voltage: ＞20 Vp-p
- Maximum output current: 221.8 mA
- Partial Performance Parameters for Line Output
- Line output level and TND+N
- K5→X1II：1.23 V（THD+N：0.006%）
- K5→X1：1.37 V（THD+N：0.008%）
- K5→X3II：1.36 V（THD+N：0.008%）
- K5→X5II：1.05 V（THD+N：0.004%
- K5→X7：1.90 V（THD+N：0.004%）
- K5→E17K：1.50 V（THD+N：0.009%）
- 0 dB 1 KHz, load: 10 kohm
- Partial Performance Parameters for Balanced Line Output
- Line output level and TND+N
- K5→X1II：1.30 V（THD+N：0.005%）
- K5→X5II：1.05 V（THD：0.004%）
- K5→X7：1.90 V（THD：0.004%）
- 0 dB 1 KHz, load: 10 kohm
Shipping
Estimated ship date is June 26, 2017 PT.
Payment will be collected at checkout. After this product run ends, orders will be submitted to the vendor up front, making all orders final.
Ask the Community!
