Hidizs AP200 Digital Audio Player
Better Music on the Go
An Android-based touchscreen digital audio player, the Hidizs AP200 delivers the high-end specs of its competitors at a lower price. It features dual 32-bit ES9118C DACs, each with a gold shield to eliminate interference from surrounding signals. The Cortex A9 1.4GHz processor gives the player enough juice to power Android 5.1, and you can stream music over Wi-Fi using apps like Tidal and Spotify on your phone. The AP200 also supports Bluetooth 4.0 and the Qualcomm aptX transmission protocol. This gives the player the ability to transmit and receive signals over Bluetooth, great for use in cars, with phones, or with wireless headphones. Finally, this version has 32 gigabytes of ROM, expandable to 256 gigabytes via the microSD slot.
Note: This drop is for the AP200 in black.
“Sleek, Pocket-Friendly Design”
Headfonics praises the AP200’s “excellent build quality” and “sleek, pocket-friendly design.” Of the sound, it says, “The AP200 has a relatively natural feel to pretty much the entire spectrum, with exception to the very top end. Bass, mids, and even up to the lower parts of the treble area seem very smooth, forgiving, and without much of an exaggeration at all on a flat EQ.”
Specs
Hardware
- CPU model: RK 31884 x Cortex-A9 1.4GHz
- DAC: ES9118C x 2, one for each channel
- DSD: HBC3000
- DAC shield: 24K gold
- Amplifier: TPA6120A2
- RAM: 1G
- ROM: 32G
- Storage expansion type: MicroSD Card
- Maximum storage expansion: 256G
Connectivity
- Wi-Fi: 2.4GHz IEEE802.11 b/g/n standards supported
- Bluetooth: Bluetooth V4.0, aptX supported
- USB interface: USB Type C, two-way USB DAC
- Hiby app: Supports LAN, DropBox, DLNA
- UI: Android 5.1/Hiby music
Physical
- Display screen: 3.54 inches, 960x640 IPS full-touch screen
- Body material: Aluminum alloy
- Rear panel: Pure glass
- Buttons: Side buttons for both volume and playback control
- Headphone jack 24K gold
USB Audio (DAC)
- DSD support: DSD 64/128
- PCM support: 384 kHz/32 bit
Output
- Headphone output: 3.5mm headphone jack
- Headphone with built-in microphone: Support
Power
- Charging interface: USB Type C
- USB power adapter: DC 5V/2A recommended
- Battery: Internal 3100mAh li-polymer battery
General
- Gain control: Low/High
- DSD gain compensation: 0/+1dB/+2dB/+3dB/+4dB/+5dB/+6dB optional
- S/PDIF DOP: Support
- Equalizer: 8 presets + custom preset, up to 48kHz
- System reboot: Hold power button
- Firmware upgrade: Supported via SD card (only FAT32 system) or via internet
- Storage expansion: One MicroSD card slot
- Date transfer: USB 3.1 High Speed
Headphone Out
- Output power: 130mW@32Ω
- Frequency response: 20-40kHz
- SNR: 115dB (20-40kHz A-weighted)
- Channel separation: 75dB (1 kHz)
- Output impedance: 4.8Ω（32Ω loaded）
- Drive ability: 16-150Ω (recommended)
- Charging: About 4 hours
- Battery life: Above 10 hours
- Dimensions: 106.5 x 60.5 x 15.7 mm (4.2 x 2.4 x 0.62 in)
- Product weight: 5.07 oz (145 g)
Lossless Format Supported
- DSD: DSD64/128 (“.iso”, “.dsf”, “.dff”)
- DXD: 352.8K
- APE Fast / High / Normal: 384kHz/24bit (MAX)
- APE Extra High: 192kHz/24bit (MAX)
- APE Insane: 48kHz/24bit (MAX)
- Apple Lossless: 384kHz/24bit (MAX)
- AIFF: 384kHz/24bit (MAX)
- FLAC: 384kHz/24bit (MAX)
- WAV: 384kHz/32bit (MAX)
- WMA LOSSLESS: 96kHz/24bit (MAX)
- Lossless compression: MP3, AAC, WMA, OGG…
Included
- USB Type-C cable
- AP200 case
- Screen protector
Shipping
Estimated ship date is May 11, 2018 PT.
Payment will be collected at checkout. After this product run ends, orders will be submitted to the vendor up front, making all orders final.
Ask the Community!
