Click to view our Accessibility Statement or contact us with accessibility-related questions
Drop + OLKB Preonic Keyboard MX Kit V3

Drop + OLKB Preonic Keyboard MX Kit V3

bookmark_border
Where's the price?
To negotiate the best possible price for our customers, we agree to hide prices prior to logging in.
17.9K requests
·
Free Returns in USA
Product Description
The original Preonic keyboard was praised for its build quality, compact form factor, and intuitive layout—and the new version is no different. However, this time around we're offering the CNC-aluminum case in your choice of five colors, including the striking new purple colorway Read More
Review Highlights:
expand_less
My absolute favorite
Easily my favorite keyboard form factor of all time. It has everything I need and nothing I don't use (and layers for things I want but don't use often). It's small enough to slip into my carry-on bag for work trips, or just in my backpack for when I'm going to chill at a coffee shop. Construction-wise, the Preonic Rev. 3 is built like a tank. Make sure you save the tiny pamphlet in the box, it has the assembly instructions. Personally, I go for the ultra-secure plate method. This uses the provided bolts and spacers to make the plate firm within the case. The plate is a hefty stainless steel plate with a tight tolerance. It will take some force to push the switches in. BE WARNED! The hotswap brackets for the switches can come off if you push too hard. I have made 4 of these model and have never had the issue, but it has been known to happen. The recommended method is to put a few switches in the plate, then line them up with the PCB, then place the remaining switches in place by putting your finger on the back of the PCB to hold the black hotswap in place while you use medium force to push the switch into the plate. This reduces the risk of popping off a hotswap. The board is programmed with QMK, but make sure when flashing it that you use the Rev 3 firmware. Rev 2 used a different micro controller and the firmware and layouts aren't compatible. I would love to do a write-up on QMK, but it's a bit complicated to set up and there are a million different things you can do with it. If you have questions, you can always ask on the OLKB subreddit (reddit/r/OLKB). Search first! Your question has probably already been asked and answered, but if you're really not sure just make a new post. People will usually help, but it's not super active so it may take a day or two to get a response. Included is a picture of my collection, which is just about a year old. I have quite a few more now...
check
Would recommend to a friend.
This is my first orhtolinear, and three days in I'm really liking it. I'm still in the process of figuring out where I want keys to be, and am _really_ liking the MOD_T setup (i.e. left-shift on hold, enter on tap, etc). From what I can see, it looks like there is a little solder on the USB-C connector, though that piece still makes me a little nervous. I got a magnetic cable set ( https://amzn.to/2Eup4dR ) so there isn't any strain on the connector. Since I pack this from work to home and back, it's great for the convenience factor alone.
See all 741 reviews
Q&A Highlights:
expand_less
Do I need to assemble this myself?
Yes, but no soldering required to get a basic keyboard with switches.
LED ready--meaning LEDs need to be soldered to the board (yes/no)?
The board comes with presoldered addressable LEDs around the edge of the board, other than that there is a cutout under each switch where you could put LEDs but there is nothing else other than the hole. If you wanted per switch LEDs you'd have to wire them separately.
See all 137 questions

Specs

  • Designed by OLKB
  • Produced by Drop
  • Anodized CNC aluminum case
  • ARM STM32 processor
  • Reprogrammable Matias / MX-compatible PCBA
  • 304 brushed stainless steel top plate
  • Rubber feet
  • Dimensions, assembled: 9.1 x 4.1 x 0.9 in (23.1 x 10.4 x 2.3 cm)

PCBA

  • Pre-soldered
  • Pre-programmed
  • 9x bottom-lit RGB LEDs: RGB LEDs that glow through the bottom of the case (acrylic cases would be preferred)
  • Standard layout
  • Cherry MX and Matias/ALPS switch footprints
  • LED ready
  • Built-in speaker

PCBA Footprints for Extra Capability

  • Footprint for a 4-channel DIP switch (210-4ES): A DIP switch is just 4 little switches combined into one (the Poker has one for settings)
  • Footprint for a 2-pin JST-PH (PRT-09749): This is a power adapter plug for wireless builds (Bluetooth, etc.)
  • Footprint for a 4-pin Qwiic (I2C) JST-SH connector (PRT-14417): Makes it compatible with Sparkfun’s Qwiic system
  • Footprint for a clickable (worked into the matrix) rotary encoder (COM-09117, et al): This will spin and click to allow even more customization
  • Footprint for a 6-pin male/female header (PRT-09015 or PRT-12590, et al): For development and DIY projects

Included (Base Price)

  • PCBA
  • Steel plate
  • CNC case (anodized if aluminum)
  • USB-A to C cable
  • PCBA-mounted stabilizers
  • 5x M2x14 mm Phillips flathead machine screws
  • 5x M2x3.5 mm brass spacers
  • 5x M2 nuts
  • 4x rubber bumpons
  • 1x socket wrench tool

IMAGE DISCLAIMER

 Images are for illustration purposes only. The color(s) of the final product may differ slightly.

RETURNS—NO QUESTIONS ASKED

We get it. Sometimes what you ordered just doesn’t work out. If that’s the case for you, don’t fret! All customers (both US and international) may return this item in new, unused condition within 30 days of delivery.

Shipping

Estimated ship date is Aug 26, 2024 PT.

Payment will be collected at checkout. Cancellations are accepted up to 2 hours after checkout for in-stock items, or up until pre-order ships.

Related Products