Alto Professional Black Loudspeakers
Powerful Sound, Wireless Control
Come on, feel the noise! One of the smaller models in Alto Professional’s Black Series, the Black 10 delivers a total continuous power rating of 1,200 watts and a peak rating of twice that—pretty impressive for a 10-inch loudspeaker. The rugged plywood cabinet is extremely portable (thanks in part to the lightweight Class D amplification and switch-mode power supply) and tough enough for your touring rig, with a textured-paint finish, powder-coated steel grille, and custom-molded handle for easy lifting. Best of all? You can control it from across the room—heck, across the whole club—using the free Live Drive app.
Note: This drop’s base price is for the Alto Professional Black 10. At checkout, you’ll be able to upgrade to the Black 12 (+ $90).
PA Loudspeaker or Floor Wedge
Designed to produce a 90- to 60-degree coverage pattern, the drivers comprise a 10-inch woofer with a 2.5-inch voice coil and a 1.75-inch HF driver feeding a 1-inch throat horn. DSP is used to provide any necessary crossover and driver protection functions, as well as time alignment and a number of EQ response curves. Ground-lift switches are fitted, as well. The simple built-in mixer can accept one mic/line input and one line-only input, each with its own level control, and one XLR output is available to feed additional speakers. Used without a sub, the Black 10 has a frequency response of 51 Hz to 20 kHz and a max SPL of 131 dB at 3.3 feet.
Specs
- Alto Professional
- System type: 10 in (25.4 cm) 2-way, self-powered, horn-loaded HF
- Frequency range (-10 dB): 45 Hz–20 kHz
- Frequency response (+/- 3 dB): 51 Hz–20 kHz
- Maximum peak SPL (measured): 131 dB at 3.3 ft (1 m)
- Coverage pattern (averaged): 90° H x 60° V
- Directivity index: 9.5 dB
- Peak power: 2,400 W (1,600 W LF + 800 W HF)
- Continuous power: 1,200 W (800 W LF + 400 W HF)
- Amplifier topology: Class D (switching, bridged LF and HF)
- Amplifier cooling: Passive
- LF transducer: 10 in (25.4 cm) cone transducer, 2.5 in (6.4 cm) voice coil, ferrite magnet
- HF transducer: 1.75 in (4.4 cm) voice coil, ferrite magnet compression driver with 1 in (2.5 cm) exit
- Power supply design: Fully regulated switching with power factor correction
- Input voltage nominal range: 100–240 VAC, 50/60 Hz
- Input voltage operating range: 90–264 VAC, 50/60 Hz
- Voltage selection: Automatic (self-regulating)
- Power connector: Male IEC
- Current requirement: 6 A per system at 120 VAC; 3 A per system at 240 VAC
- AC line cord: 9.8 ft (3 m) IEC female to regional AC male, 18 AWG
- Wireless type: Bluetooth 2.0 + EDR, class 2 RF
- Wireless range (typical): 82 ft (25 m) clear line of sight
- Wireless control app: Alto Professional Live Drive (available in Apple App Store)
- Simultaneous devices connectable: 1–3 Black Series loudspeakers
- Wireless compatibility: iPhone 3GS and later, iPad 2 and later, iPod Touch 4 and later
- iOS version requirements: iOS 6.1 and later
- Construction: Premium plywood
- Finish: High-durability textured, catalyzed polyurethane (black)
- Mounting: 12 M10 female threaded screw sockets
- Handles: Ergonomic with aluminum crossbar
- Stand mount: 35 mm female socket
- Grille: 1.2 mm perforated steel, black powder coat
- Dimensions: 22 x 13 x 13.5 in (55.9 x 33 x 34.3 cm)
- Weight: 45.7 lb (20.7 kg)
- Designed and tuned in USA
Shipping
Estimated ship date is Feb 29, 2016 PT.
Payment will be collected at checkout. After this product run ends, orders will be submitted to the vendor up front, making all orders final.
Ask the Community!
