M&O MOOH-BE00BT Headphones
Great-Sounding Headphones That Go Wireless, Too
M&O’s MOOH-BE00BT (or MOZero) headphones have been turning heads at CanJam events: inexpensive and well-liked, they represent an impressive value in the closed-back category. The 45-millimeter drivers use beryllium, a material that’s rarely found even in much more expensive models. Light but rigid, beryllium allows sound to travel quickly with low distortion and high efficiency. These drivers are part of the reason audiophiles are calling the headphone “the best-sounding closed-back that can be had for under $200.” With all this talk of their sound, it can be easy to forget how well the MOZeros function as Bluetooth headphones. They’re rated for 32 hours of continuous Bluetooth transmission with music volume at 80 percent. When you run out of juice, switch seamlessly to wired listening with the included 3.5-millimeter cable. You can also add a transparent MOHP-00BT headphone stand to store these high-performing headphones in any setup.
Note: At checkout, you can add an optional MOHP-00BT headphone stand for (+ $5).
The Reviews Are In
Head-Fi user kman1211 says, "Overall, I rate these headphones very highly. I don't give five-star reviews lightly, but this headphone gets one from me due to its excellent sound, good comfort, and value, plus the added benefit of wireless functionality with excellent battery life … Tuning wise, this headphone will be better suited for people who like a punchy and strong bass and lively dynamics. Regardless of the tuning, the actual quality of sound is excellent. I see a lot of pad rolling potential with these … I highly recommend these headphones on their sound quality alone. The wireless is just the icing on the cake." Headphone Guru adds, "I cannot recommend the MOZero more to someone looking for a great-sounding set of headphones that they need to take out with them on the go. It has a phenomenal battery life and is equipped with a backup wired component."
Headphone Stand Options
MOHP-00BT
Specs
General
- M&O Electronics
- Transducer: Closed-back moving coil, 45mm diameter, Nd-Fe-B
- Diaphragm: Beryllium acoustic technique
- Impedance: 32 ohms
- Frequency response: 20 Hz–40 kHz
- Sensitivity: 101 dB +/- 5 dB at 20 kHz, 106 dB +/- 5 dB at 50 Hz, 109 dB +/- 5 dB at 100 Hz, 104 dB +/- 5 dB at 200 Hz, 101 dB +/- 4 dB at 500 Hz, 99 dB +/- 3 dB at 1 kHz, 98 dB +/- 4 dB at 2 kHz, 94 dB +/- 6 dB at 5 kHz, 105 dB +/- 6 dB at 10 kHz, 98 dB +/- 6 dB at 20 kHz
- Microphone: Electret 4015 omnidirectional
- Microphone impedance: 2.2 kohms
- Microphone frequency response: 100 Hz–10 kHz
- Microphone sensitivity: -42 dB +/- 4 dB at SPL/mW
- Bluetooth version: 4.0
- Bluetooth profile: A2DP V1.2, AVRCP V1.4, HFP V1.6, HSP V1.2
- Supported codecs: aptX, SBC
- Active echo cancellation and CVC noise suppression during calls
- RF transmission power: Class II, +4 dBm max.
- Receiver sensitivity: -80 dBm
- Maximum range: Line of sight, more than 33 ft (10 m)
- Passcode possibly required when pairing devices below Bluetooth 2.0: 0000
- Power supply: 700 mAh DC 3.7V lithium-polymer battery
- Charging: 5V DC (180 mA maximum charging current)
- 5V DC charging time: About 5.5 hrs
- Continuous Bluetooth transmission during music playback: ~32 hrs at 80% volume
- Continuous Bluetooth transmission during talk: ~35 hrs at 80% volume
- Power-conscious automatic system shutdown: After ~5 mins of continuous no connection of Bluetooth transmission signals
- Low-battery warnings before system shutdown: Visual and verbal every minute lasting more than 10 minutes before shutdown
- Passive-mode audio operation without Bluetooth transmission: Activated by plugging 3.5mm audio cable into stereo audio port; extended battery life
- Headphone operation during charging: Supports all functions
- Weight: 9.8 oz (278 g)
Earcup Rotation
- Each earcup is rotatable 90 degrees
- Rotate earcups slowly and carefully
- Resistance will arise with rotation in the wrong direction or outside of a 90-degree capability
- Immediately stop rotating when resistance arises
- Ignoring arising resistance and forcibly rotating earcup in a wrong direction or beyond 90-degree capability may result in hinge damage
Earpad Replacement
- When replacing earpads, be aware of earcup rotation resistance
- Whenever possible, keep earcups in a 45-degree position during earpad replacement
Elastic Rubber Band Packaging
- The elastic rubber band in the traveling EVA case is tight, which means users may have to push headphone earcup to pack or unpack headphones
- To avoid hinge damage, remove the rubber band by cutting it off at both ends
Included
- User manual
- Hard case
- Micro-USB charging cable
- Stereo headphone cable
- MOHP-00BT
Shipping
Estimated ship date is Aug 12, 2020 PT.
Payment will be collected at checkout. After this product run ends, orders will be submitted to the vendor up front, making all orders final.
Ask the Community!
