RME ADI-2 Pro FS R AD/DA Converter (Black Edition)

General

• RME
• DAC chip: AKM AK4493
• SteadyClock FS clocking
• Inputs: (2) Servo-balanced XLR/TRS combo analog inputs, coaxial, optical
• Outputs: XLR (left and right), (2) 6.35 mm headphone outputs (balanced), (2) 6.35 line outputs (unbalanced), coaxial, optical
• Included power supply: External switching PSU, 100 – 240 V AC, 2 A, 24 W
• Standby power consumption: 50 mW
• Idle power consumption: 10 W
• Maximum power consumption: 22 W
• Idle current at 12 V: 850 mA (10 W)
• Dimensions: 8.5 x 1.73 x 5.1 in (21.5 x 4.4 x 13 cm)
• Weight: 2.2 lbs (1 kg)
• Temperature range: 41°F – 122°F (5°C – 50°C) 
• Relative humidity: < 75%, non condensing
• Made in Germany

Digital 

• Clocks: Internal, AES In, SPDIF In, ADAT In
• Jitter suppression of external clocks: > 50 dB (2.4 kHz)
• Effective clock jitter influence on AD and DA conversion: near zero
• PLL ensures zero dropout, even at more than 100 ns jitter
• Additional Digital Bitclock PLL for trouble-free varispeed ADAT operation
• Supported sample rates for external clocks: 32 kHz up to 200
• Internally supported sample rates: 44.1 kHz up to 768 kHz

Digital Inputs

• Inputs: AES/EBU XLR (transformer-balanced, galvanically isolated, according to AES3-1992), RCA coaxial (transformer-balanced, according to IEC 60958), optical (according to IEC 60958)
• Lock range: 28 kHz – 200 kHz
• Jitter suppression: > 50 dB (2.4 kHz)
• Input sensitivity (XLR): 1 Vpp
• High-sensitivity input stage (< 0.3 Vpp) (SPDIF coaxial)
• Compatibility (SPDIF coaxial): AES/EBU compatible (AES3-1992)
• Compatibility (SPDIF optical): ADAT compatible

Digital Outputs

• Outputs: AES/EBU XLR (transformer-balanced, galvanically isolated, according to AES3-1992), RCA coaxial (transformer-balanced, according to IEC 60958), optical (according to IEC 60958)
• Output level (XLR): 2.7 Vpp
• Output level (SPDIF coaxial): 0.75 Vpp
• Single Wire mode sample rate (XLR, SPDIF coaxial): 28 kHz – 200 kHz
• Sample rate (SPDIF optical): 28 kHz – 200 kHz

XLR Analog Inputs

• Left and right servo-balanced XLR inputs
• Input sensitivity (switchable): +24 dBu, +19 dBu, +13 dBu, +4 dBu (0 dBFS)
• Digital Trim gain range: 0 dB up to +6 dB
• Signal to Noise ratio (SNR) (+13/19/24 dBu): 120 dB RMS unweighted, 124 dBA
• Signal to Noise ratio (SNR) (+4 dBu): 119 dB RMS unweighted, 123 dBA
• Frequency response (44.1 kHz, -0.1 dB): 5 Hz – 20.5 kHz
• Frequency response (96 kHz, -0.5 dB): 3 Hz – 45.5 kHz
• Frequency response (192 kHz, -1 dB): 2 Hz – 92.7 kHz
• Frequency response (384 kHz, -1 dB): < 1 Hz – 124 kHz
• Frequency response (768 kHz, -3 dB): < 1 Hz – 180 kHz
• THD (-1 dBFS): -116 dB, 0.00016 %
• THD (-10 dBFS): -125 dB, 0.000056 %
• Channel separation: > 110 dB

TRS Analog Input

• Input: 6.3 mm TRS jack, servo-balanced, fully compatible with TS and RCA
• Input sensitivity (switchable): +24 dBu, +19 dBu, +13 dBu, +4 dBu (0 dBFS)
• Digital trim gain range: 0 dB up to +6 dB
• Signal to noise ratio (SNR) (+13/19/24 dBu): 120 dB RMS unweighted, 124 dBA
• Signal to noise ratio (SNR) (+4 dBu): 119 dB RMS unweighted, 123 dBA
• Frequency response (44.1 kHz, -0.1 dB): 5 Hz – 20.5 kHz
• Frequency response (96 kHz, -0.5 dB): 3 Hz – 45.5 kHz
• Frequency response (192 kHz, -1 dB): 2 Hz – 92.7 kHz
• Frequency response (384 kHz, -1 dB): < 1 Hz – 124 kHz
• Frequency response (768 kHz, -3 dB): < 1 Hz – 180 kHz
• THD (-1 dBFS): -116 dB, 0.00016 %
• THD (-10 dBFS): -125 dB, 0.000056 %
• Channel separation: > 110 dB

1/2 XLR Analog Output

• Output level (switchable): +24 dBu, +19 dBu, +13 dBu, +4 dBu (0 dBFS)
• Signal to Noise ratio (SNR) (+13/19/24 dBu): 120 dB RMS unweighted, 124 dBA
• Signal to Noise ratio (SNR) (+4 dBu): 117 dB RMS unweighted, 120 dBA
• Frequency response (44.1 kHz, -0.1 dB): 0 Hz – 20.2 kHz
• Frequency response (96 kHz, -0.5 dB): 0 Hz – 44.9 kHz
• Frequency response (192 kHz, -1 dB): 0 Hz – 88 kHz
• Frequency response (384 kHz, -1 dB): 0 Hz – 115 kHz
• Frequency response (768 kHz, -3 dB): 0 Hz – 109 kHz
• THD (0 dBFS): < -120 dB, 0.0001 %
• THD+N (0 dBFS): -115 dB, 0.00018 %
• Channel separation: > 110 dB
• Output impedance: 200 ohms

1/2 TS Rear Analog Output

• Output: 6.3 mm TS jack, unbalanced
• Output level (switchable): +19 dBu, +13 dBu, +4 dBu (0 dBFS)
• Signal to noise ratio (SNR) (+19 dBu): 120 dB RMS unweighted, 123 dBA
• Signal to noise ratio (SNR) (+13 dBu): 118 dB RMS unweighted, 121 dBA
• Signal to noise ratio (SNR) (+4 dBu): 115 dB RMS unweighted, 118 dBA
• Frequency response (44.1 kHz, -0.1 dB): 0 Hz – 20.2 kHz
• Frequency response (96 kHz, -0.5 dB): 0 Hz – 44.9 kHz
• Frequency response (192 kHz, -1 dB): 0 Hz – 88 kHz
• Frequency response (384 kHz, -1 dB): 0 Hz – 115 kHz
• Frequency response (768 kHz, -3 dB): 0 Hz – 109 kHz
• THD (0 dBFS): < -120 dB, 0.0001 %
• THD+N (0 dBFS): -115 dB, 0.00018 %
• Channel separation: > 110 dB
• Output impedance: 100 ohms

1/2 Headphone Analog Output

• Output: 6.3 mm TRS jack, unbalanced, stereo
• Output level (0 dBFS, Ref Level +19 dBu, load 100 ohms or up): +22 dBu (10 V)
• Output level (0 dBFS, Ref Level +4 dBu, load 8 ohms or up): +7 dBu (1.73 V)
• Signal to Noise ratio (SNR) (+22 dBu): 120 dB RMS unweighted, 123 dBA
• Signal to Noise ratio (SNR) (+7 dBu): 118 dB RMS unweighted, 121 dBA
• Frequency response (44.1 kHz, -0.1 dB): 0 Hz – 20.2 kHz
• Frequency response (96 kHz, -0.5 dB): 0 Hz – 44.9 kHz
• Frequency response (192 kHz, -1 dB): 0 Hz – 88 kHz
• Frequency response (384 kHz, -1 dB): 0 Hz – 115 kHz
• Frequency response (768 kHz, -3 dB): 0 Hz – 109 kHz
• THD (+18 dBu, 32 Ohm load, 1.2 W): -110 dB, 0.0003 %
• THD+N (+ 18 dBu, 32 ohm load): -107 dB, 0.00045 %
• THD (+14 dBu, 16 ohm load, 0.94 W): -110 dB, 0.0003 %
• Max power (0.001% THD): 1.5 W per channel
• Channel separation: > 110 dB
• Output impedance: 0.1 ohms

3/4 Headphone Analog Output

• Output: 6.3 mm TRS jack, unbalanced, stereo
• Output levels (0 dBFS): +7 dBu (High-Power off), +22 dBu (High-Power on)
• Signal to noise ratio (SNR) (+22 dBu): 120 dB RMS unweighted, 123 dBA
• Signal to noise ratio (SNR) (+7 dBu): 118 dB RMS unweighted, 121 dBA
• Frequency response (44.1 kHz, -0.1 dB): 0 Hz – 20.2 kHz
• Frequency response (96 kHz, -0.5 dB): 0 Hz – 44.9 kHz
• Frequency response (192 kHz, -1 dB): 0 Hz – 88 kHz
• Frequency response (384 kHz, -1 dB): 0 Hz – 115 kHz
• Frequency response (768 kHz, -3 dB): 0 Hz – 109 kHz
• THD (+18 dBu, 32 Ohm load, 1.2 W): -110 dB, 0.0003 %
• THD+N (+ 18 dBu, 32 ohm load): -107 dB, 0.00045 %
• THD (+14 dBu, 16 ohm load, 0.94 W): -110 dB, 0.0003 %
• Max power (0.001% THD): 1.5 W per channel
• Channel separation: > 110 dB
• Output impedance: 0.1 ohms

Balanced Headphone Analog Output

• Output: 6.3 mm TRS jack, unbalanced, stereo
• Output level (0 dBFS, High-Power on, load 150 Ohm or up): +28 dBu (19.5 V)
• Output level (0 dBFS, High-Power off, load 8 Ohm or up): +13 dBu (3.46 V)
• Signal to Noise ratio (SNR) (+28 dBu): 123 dB RMS unweighted, 126 dBA
• Signal to Noise ratio (SNR) (+13 dBu): 121 dB RMS unweighted, 125 dBA
• Frequency response (44.1 kHz, -0.1 dB): 0 Hz – 20.2 kHz
• Frequency response (96 kHz, -0.5 dB): 0 Hz – 44.9 kHz
• Frequency response (192 kHz, -1 dB): 0 Hz – 88 kHz
• Frequency response (384 kHz, -1 dB): 0 Hz – 115 kHz
• Frequency response (768 kHz, -3 dB): 0 Hz – 109 kHz
• THD (+18 dBu, 32 Ohm load, 1.2 W): -110 dB, 0.0003 %
• THD+N (+ 18 dBu, 32 ohm load): -107 dB, 0.00045 %
• THD (+14 dBu, 16 ohm load, 0.94 W): -110 dB, 0.0003 %
• Max power (0.001% THD): 2,9 W per channel
• Channel separation: > 110 dB
• Output impedance: 0.2 ohms

• Remote control with battery (MRC)
• Owner’s manual
• Quick start guide
• Power cord
• Digital breakout cable AES/SPDIF (BO968)
• External switched power supply, lockable connector (DC 12 V 24 W)