TEAC TN-300SE & TN-350 Turntables

TEAC TN-300SE

Turntable 

• Drive system: Belt Drive
• Motor: DC Motor
• Speed: 33 1/3 RPM, 45 RPM, 
• Rotation speed variation: +/–2%
• Wow and flutter: 0.2%
• Signal-to-noise ratio: 67dB or higher (A-weighted, 20kHz LPF), 60dB or higher (unweighted, 20kHz LPF)
• Platter: Aluminum Die-cast
• Diameter of platter: 12 in (30 cm)

Tonearm 

• Type: Static Balanced, straight
• Effective arm length: 8.8 in (22.3 cm)
• Stylus pressure range: 0 to 5g
• Supported cartridge weight: 3.5 to 6.5g
• Anti-skating adjustment: Supported

Cartridge 

• Type: MM type (audio-technica AT95E factory installed)
• Stylus shape: Elliptical
• Stylus construction: Bonded Round Shank
• Mount: Half inch
• Frequency response: 20Hz to 20kHz
• Channel separation: 20dB at 1kHz
• Output balance: 2dB
• Tracking force: 1.5 to 2.5g
• Vertical tracking angle: 20°
• Supported load impedance: 47k ohms
• Output voltage: 3.5mV (1kHz, 5cm/sec.)
• Stylus pressure: 2.0g +/–0.5g
• Cartridge weight: 5.7g +/–0.5g
• Head-shell Weight: 0.3 oz (10 g) (including Screws, Nuts and Wires)
• Replacement stylus: Audio-Technica ATN95E

Phono Equalizer Amplifier

• Type of amplifier: MM type (On/Thru switchable)

Analog Output

• Connector: RCA Pin jack (Gold-plated)
• Output voltage: Phono/Line switchable
• Phono output: 4.5mV (± 3dB)
• Line output: 120mV (–13dBV)

USB Output Section

• Connector: USB B type
• Output signal: PCM 48kHz/16-bit
• Supported OS: Windows 7, Windows 8, Windows 8.1, Windows 10, OS X Lion (10.7), OS X Mountain Lion (10.8), OS X Mavericks (10.9), OS X Yosemite (10.10), OS X El Capitan (10.11), Mac OS Sierra (10.12)

Physical

• Finish: Matte black, walnut
• Power: AC 100 to 240V, 50/60Hz
• Power consumption: 1.5W (less than 0.5W at Standby)
• Overall dimensions (W x H x D): 16.5" x 4.6" x 14.0" (42 x 11.7 x 35.6 cm)
• Weight: Approx. 10.8 lbs (4.9 kg)

TEAC TN-350 (+ $15)

Turntable  

• Drive system: Belt drive
• Motor: DC motor
• Speed: 33 1/3 RPM, 45 RPM
• Rotation speed variation: +/–2%
• Wow and flutter: 0.2%
• Signal-to-noise ratio: 67dB or higher (A-weighted, 20kHz LPF)
• 60dB or higher (unweighted, 20kHz LPF)
• Platter: Aluminum die-cast
• Diameter of platter: 12 in (30 cm)

Tonearm  

• Type: Static balanced, S-shaped
• Effective arm length: 8.8 in (223 mm)
• Stylus pressure range: 0 to 5 g
• Supported cartridge weight: 3.5 to 6.5 g
• Anti-skating adjustment supported

Cartridge

• Type: MM type (Audio-Technica AT95E factory installed)
• Stylus shape: Elliptical
• Stylus construction: Bonded round shank
• Mount: 0.5 in
• Frequency response: 20Hz to 20kHz
• Channel separation: 20dB at 1kHz
• Channel balance: 2.0dB
• Tracking force: 1.5 to 2.5g
• Vertical tracking angle: 20 degrees
• Supported load impedance: 47k ohms
• Output voltage: 3.5mV (1kHz, 5cm/sec.)
• Stylus pressure: 2.0g +/–0.5g
• Cartridge weight: 5.7g +/–0.5g
• Head-shell weight: 10g (including Screws, Nuts and Wires)
• Replacement stylus: Audio-Technica ATN95E

Phono Equalizer Amplifier  

• Type of amplifier: MM type (on/thru switchable)

Analog Output  

• Connector: RCA pin jack (gold-plated)
• Output voltage: Phono/line switchable
• Phono output: 4.5mV +/–3dB
• Line output: 120mV (–13dBV)

USB Output  

• Connector: USB B type
• Output signal: PCM 48kHz/16-bit
• Supported OS: Windows 7, Windows 8, Windows 8.1, Windows 10, OS X Lion (10.7), OS X Mountain Lion (10.8), OS X Mavericks (10.9), OS X Yosemite (10.10), OS X El Capitan (10.11), macOS Sierra (10.12)

Physical

• Power AC: 100 to 240V, 50/60Hz
• Power Consumption: 1.5W (less than 0.5W at Standby)
• Overall Dimensions: 16.5 x 4.6 x 14.0 in (420 x 117 x 356 mm)
• Weight: 10.8 lbs (4.9 kg)

• Felt mat
• EP adapter
• Counter weight
• Headshell (Audio-Technica AT95E)
• Platter
• Dust cover
• (2) rubber feet for dustcover
• (2) hinges
• RCA audio cable
• AC adapter (GPE053A-120050-1)
• Owner’s manual
• TEAC’s 1-year warranty